Clifford 562C User Manual
  1. Manuals
  2. Brands
  3. Clifford Manuals
  4. Car Alarm
  5. 562C
  6. User manual
Clifford 562C User Manual

Clifford 562C User Manual

Clifford security system user manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Clifford CLIFFORD 562C

Summary of Contents for Clifford CLIFFORD 562C

  • Page 3 Limited Consumer Warranty For a period of one calendar year from the date of purchase of this device, Directed Electronics, Inc. promises to the ORIGINAL PURCHASER to repair or replace (with a comparable reconditioned model), free of cost, any electronic control module which proves to be defective in workmanship or material under normal use, SO LONG AS THE SYSTEM WAS SOLD, INSTALLED, AND SERVICED BY A PROFESSIONAL AUTO INSTALLER, AND REMAINS IN THE CAR IN WHICH THE SYSTEM WAS ORIGINALLY INSTALLED.
  • Page 4 TO THE MAXIMUM EXTENT ALLOWED BY LAW, ANY AND ALL WARRANTIES ARE EXCLUD- ED BY THE MANUFACTURER AND EACH ENTITY PARTICIPATING IN THE STREAM OF COM- MERCE THEREWITH. THIS EXCLUSION INCLUDES BUT IS NOT LIMITED TO THE EXCLU- SION OF ANY AND ALL WARRANTY OF MERCHANTABILITY AND/OR ANY AND ALL WAR- RANTY OF FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY AND ALL WARRANTY OF NON-INFRINGEMENT OF PATENTS, IN THE UNITED STATES OF AMERICA AND/OR ABROAD.

  • Page 5: Table Of Contents

    Table of Contents Limited Lifetime Consumer Warranty ....... i Standard Configuration .

  • Page 6: Standard Configuration

    Standard Configuration controls the Lock/Panic ON/Panic OFF function. controls the Disarm function. controls Silent Mode™and an Auxiliary Output. controls Remote Start. controls Timer mode. controls Turbo/Short Run. controls Channel 4 output. 2004 Directed Electronics, Inc. ©...

  • Page 7: What Is Included

    What is Included ■ The control module ■ An receiver/antenna ■ Two four-button transmitters ■ The status LED indicator light ■ A push-button Valet ■ Your warranty registration ■ A shut-down toggle switch Important Information Congratulations on the purchase of your remote start keyless entry system.

  • Page 8: System Maintenance

    System Maintenance The system requires no specific maintenance. Your remote is powered by a small, lightweight 3-volt lithium battery that will last approx- imately one year under normal use. When the battery begins to weaken, operating range will be reduced and the LED on the remote will dim. Your Warranty Your warranty registration must be completely filled out and returned within 10 days of purchase.

  • Page 9: Transmitter Functions

    Transmitter Functions The receiver uses a computer-based learn routine to learn the transmitter buttons. This makes it possible to assign any specific transmitter button, or combination of buttons, to any receiver function. The transmitter initially comes programmed with the Standard Configuration, but may also be customized by an autho- rized dealer.

  • Page 10: Using Your System

    Button The remote start function of your system is controlled by pressing this button twice within 3 seconds. Buttons An optional auxiliary convenience or expansion function that you have added to your system can be activated by pressing these but- tons simultaneously.
  • Page 11 must be disabled using the installed toggle switch. It is the user's sole responsibility to properly handle and keep out of reach from children all remote control transmitters to assure that the system does not unintentionally remote start the vehicle. THE USER MUST INSTALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO THE VEHICLE.

  • Page 12: Locking

    has not been properly installed. The remote start module must be removed or the installer must properly reinstall the remote start system so that the vehicle does not start in gear. All installations must be performed by an authorized Directed Electronics dealer.

  • Page 13: Unlocking

    The system can also be programmed to arm the optional Failsafe Starter Kill automatically (called Passive Mode). If the system has been programmed for Passive Mode, the Failsafe automatically activate 30 seconds after the ignition has been turned off. After the ignition has been turned off, the status LED will flash rapidly to indicate that the system is in Passive Mode.

  • Page 14: Disabling The Starter Kill Without A Transmitter

    Disabling the Starter Kill Without a Transmitter If your remote transmitter is lost or damaged, you can manually override the starter kill. To do this, you must have the vehicle's ignition key and know where the Valet to check with the installer for the location of the Valet To override the starter kill, turn the ignition on and press the Valet...

  • Page 15: Panic Mode

    To enter or exit Valet 1. Turn the ignition on. 2. Turn the ignition off. 3. Press and release the Valet switch within 10 seconds. The status LED will light steadily if you are entering Valet and will turn off if you are exiting Valet Panic Mode If you are threatened in or near your vehicle, you can attract attention by triggering the system with your transmitter.

  • Page 16: Remote Start

    Remote Start This feature allows you to remotely start and run your vehicle for a programmable period of time. This makes it possible to warm up the engine, as well as adjust the interior temperature of the vehi- cle with the climate control system. If interior heating or cooling is desired, the climate controls must be preset, and the fan blower must be set to the desired level prior to remote starting the vehicle.
  • Page 17 When you are ready to drive the vehicle: 1. Insert the ignition key and turn it to the ON (not the START) position. 2. Press the brake pedal. NOTE: If the brake pedal is pressed before the key is in the ON position, the engine will shut down.

  • Page 18: Valet Take-Over

    Valet ® Take-Over The Valet ® Take-Over feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time, but would like to leave the motor running and the climate controls on.

  • Page 19: Timer Mode

    Remove your foot from the brake pedal and leave the engine running. Press and release the The lights will flash to indicate the remote start has entered short run turbo mode. Turn off the key, the engine will keep running. Exit and secure the vehicle.

  • Page 20: Starter Anti-Grind Circuitry

    The system will start every 3 hours until canceled by the brake, hood, or neutral safety shut-down wires. Timer Mode should be used only in important! ! open areas. Never start and run the vehicle in an enclosed space such as a garage or carport. To exit timer mode, turn the ignition switch on any time the engine is running.

  • Page 21: Disabling The Remote Start System

    Disabling the Remote Start System This feature allows your system's remote start unit to be tem- porarily disabled to prevent the vehicle from being remote start- ed accidentally. This feature is useful if the vehicle is being ser- viced or stored in an enclosed area. To disable the remote start, move the shutdown toggle switch to the OFF position.

  • Page 22: Programming Options

    Programming Options Programming options control your system's normal, operational set-up. Most options do not require additional parts, but some may require additional installation labor. This system's programming options are listed below, with the factory default settings in bold: ■ 12, 24, or 60 minute run time. Your system can be pro- grammed to allow the vehicle to run for 12, 24, or 60 min- utes when remote started or in Timer Mode.

  • Page 23: Glossary Of Terms

    Glossary of Terms Control Unit: The “brain” of your system. Usually hidden under- neath the dash area of the vehicle. It houses the microprocessor which monitors your vehicle and controls all system functions. Failsafe ® Starter Kill: An automatic switch controlled by your sys- tem which prevents the vehicle’s starter from cranking whenever the system is armed.

  • Page 24: Convenience Expansions

    Convenience Expansions Listed below are some of the many expansion options available for use with your system. Some options may require additional parts and/or labor. Please consult with your dealer for a complete list of options available for use with this system. Domelight Supervision: The domelight will illuminate for 30 seconds each time the system is disarmed using the transmitter.
  • Page 25 Power Window Control: Power window control is provided with Directed Electronics 529T or 530T systems. The 529T system will roll up two windows automatically when the system is armed, or roll two windows down by using the transmitter. The 530T will roll two windows both up and down.
  • Page 26 2004 Directed Electronics, Inc. ©...

  • Page 27: Notes

    Notes 2004 Directed Electronics, Inc. ©...
  • Page 28 2004 Directed Electronics, Inc. ©...

  • Page 29: Quick Reference Guide

    QUICK REFERENCE GUIDE: To lock using your remote ■ To arm the system press nected). The LED will begin to flash. The Failsafe vent the vehicle’s starter from cranking if it has been installed. The ve- hicle’s horn (if connected) will honk and the parking lights will flash once to confirm arming of the system.
  • Page 30 The company behind this system is Directed Electronics, Inc. Since its inception, Directed Electronics, Inc. has had one purpose, to provide con- sumers with the finest vehicle security and car stereo products and accessories available. The recipient of nearly 100 patents and Innovations Awards in the field of advanced electronic technology, Directed Electronics, Inc.

Table of Contents