Rack-Mount The Chassis Using Slide Rails; Ground The Chassis; Connect Cables, Turn On Power, And Verify Connectivity For Cisco Firepower Threat Defense, On Page; Connect Cables, Turn On Power, And Verify Connectivity Using Cisco Firepower Management Center - Cisco Firepower 2100 Series Hardware Installation Manual

Rack-Mount the Chassis Using Slide Rails

Figure 34: Install the Cable Management Studs into the Rack-Mount Bracket
b) Install two 8-32-in. screws through the inside of the rack-mount bracket to secure the cable management bracket to
the rack-mount bracket.

Step 3

Attach the chassis with the installed rack-mount bracket to the rack using the screws that work for your rack.
What to do next
•
•
•
•

Rack-Mount the Chassis Using Slide Rails

Take note of the following warnings:
Cisco Firepower 2100 Series Hardware Installation Guide
48
Ground the Chassis, on page 54

Connect Cables, Turn on Power, and Verify Connectivity for Cisco Firepower Threat Defense, on page

57

Connect Cables, Turn on Power, and Verify Connectivity Using Cisco Firepower Management Center,

on page 60
Connect Cables, Turn on Power, and Verify Connectivity for Cisco ASA, on page 62
Mount and Connect