Download Firmware - IBM SAN04M-R Installation And Service Manual

Download firmware

38 SAN04M-R SAN Router Installation And Service Manual
NOTE: The TFTP server daemon is not part of the base Windows operating
system; this service is part of the Remote Installation Services (RIS) package
that is available in the operating installation disk.
Follow these steps:
1. Install the Remote Installation Services from the operating systems
installation disk if the TFTP server daemon was not previously
installed. (To determine if the TFTP server daemon is already
installed, perform step 3
2. Restart the system after installing the TFTP server daemon.
3. Click the right mouse button over the My Computer icon located
on the desktop to display a popup menu and then select Manage.
4. In the Computer Management window, select Services under
Services and Applications.
5. Locate the Trivial FTP Daemon in the list of services and start the
service by selecting the Trivial FTP Daemon service and then click
the right mouse button to bring up a popup menu and select
Start. (You can verify that the Trivial FTP Daemon service has
been started by reviewing the Status column; the status should
now be Started.)
6. The TFTP server daemon is now ready to use to download
firmware.
The root directory is preconfigured for the daemon and cannot be changed.
The root path directory is: <drive> :\tftpdroot.
To download firmware:
1. From the Element Manager main window, select File>Firmware
Upgrade. The dialog shows the previous version, build date, the
active/inactive status of both firmware locations, the TFTP Server
IP address, and the full path and filename of the existing
firmware. See Figure 9, Firmware upgrade dialog
2. Enter or edit the TFTP Server IP address where the firmware
image is stored.
3. Enter the filename of the Firmware file that should be present in
your TFTP default directory.
through step 5.)
box.