Table of Contents
Advertisement
Chapter 3: Maintenance and troubleshooting
Downloading firmware
Download firmware using Element Manager
Installing and configuring a TFTP server application - windows server
© Copyright IBM Corp. 2007
Use the links below to access the major topics in this chapter.
Section
Downloading firmware
Troubleshooting
LEDs on the SAN Router
You can use the CLI or Element Manager to download and install a
new version of firmware for the SAN Router.
The SAN Router can store up to two versions of firmware – the
currently active version and an inactive version. You can also
download the boot ROM.
ATTENTION! Power cycling the SAN Router during a boot ROM upgrade
will render the SAN Router unusable. If the boot ROM becomes corrupted,
contact technical support to have the unit returned to the factory for
reinitialization.
Before you can download firmware, a Trivial FTP (TFTP) server
application must be running on the management workstation. Below
are two recommendations for server applications.
You can install a TFTP server daemon for Windows 2000 Server or
Windows Server 2003 to enable you to access and download
firmware to the SAN Router.
Page
37
40
41
37
Advertisement
Table of Contents
Troubleshooting
