Figure 5
Task 10: Configure and enable call home notification
IP address management
24
SAN04M-R SAN Router Installation And Service Manual
— NAS Device Host port.
•
Targets/Storage.
— FC JBOD ports.
— FC storage array ports.
— FC tape drive/ library ports.
•
FC Switches
— FC SwitchE_Ports.
— SCSI to FC Bridge devices.
Fibre Channel ports
The enable call home notification feature enables the EFCM
application installed on a server to automatically dial-in to a support
center to report system problems and events from the SAN Router.
To configure the call home notification feature, you must first specify
the support center information using the call home configuration tool
provided with EFCM. After the call home notification feature is
configured, you need to enable call home notification using EFCM.
The steps to configure and enable the call home notification are listed
in the EFC Manager Software User Manual.
See
Figure 6, IP addresses associated with SAN Router
of the IP addresses associated with the SAN Router and how they are
used in the network.
for an illustration