Firmware Library Dialog Box; New Firmware Version Dialog Box; New Firmware Description Dialog Box - HP StorageWorks Installation Manual
Edge switch 2/24, fw 07.00.00/hafm sw 08.06.00
Hide thumbs
Also See for StorageWorks:
- User manual (204 pages) ,
- Reference manual (54 pages) ,
- Getting started manual (52 pages)
Table of Contents
Advertisement
3.
Select Maintenance > Firmware Library. The Firmware Library dialog box is displayed
(Figure
47).
Figure 47
Firmware Library dialog box
4.
Click New. The New Firmware Version dialog box is displayed
Figure 48
New Firmware Version dialog box
5.
Select the desired firmware version file (downloaded in
backup drive, CD-ROM drive, or hard drive. Verify that the correct directory path and filename
display in the File name field and click Save. The New Firmware Description dialog box is
displayed
(Figure
49).
Figure 49
New Firmware Description dialog box
6.
Enter a description (up to 24 characters in length) for the new firmware version and click OK. HP
recommends that the description include the installation date and text that uniquely identifies the
firmware version.
7.
A Transfer Complete message box is displayed indicating the new firmware version is stored on
the HAFM appliance hard drive. Click Close to close the message box.
The new firmware version and associated description display in the Switch Firmware Library
dialog box.
8.
Click Close.
9.
To send the firmware version to an Edge Switch, see
on page 83.
(Figure
48).
step
1) from the HAFM appliance
"Download a firmware version to a
Edge Switch 2/24 installation guide
switch"
81
Advertisement
Table of Contents
