Oce TDS400 Quick Reference Manual page 70

Finishing: output delivery tray
Model
Capacity
Types of media
Dimensions
Weight
List of available material types and sizes
Finishing: folder
Folding modes
Folding method
Paper size
First fold exit
Dimensions
Weight
Optionals
Compact output stacker
Model
Capacity
Dew Preventer
Model
Océ machines and materials are matched for optimal quality and performance.
It is therefore recommended to use only approved Océ materials in the Océ
TDS400.
A full list of Océ materials suited for use in the Océ TDS400, including plain
paper, transparent paper, coloured papers and various polyester films is
available from your Océ representative.
70 Océ TDS400 Quick Reference Manual
Wheeled delivery tray with blower unit
Up to 150 sheets (media type dependent) from A4 to A0
Plain paper, transparent paper, film, vellum, polyester
and translucent
1170 mm (W) x 1090 mm (H) x 1440 mm (D) with tray
fully extended
35,5 kg
On-line fanfold and crossfold, off-line folding
Standard (=DIN-like), Ericsson, Afnor-like;
Length: 276 - 310 mm
Width: 186 - 230 mm
Filing strip: 15 - 30 mm
2
(75 g/m ),
Width: 279 - 914 mm
Length: 210 - 6,000 mm fanfold only;
210 - 2,500 mm for fanfold and crossfold
Extra bin for fanfold
2,200 mm (W) x 997 mm (H) x 1,260 mm (D)
220 kg
Reinforcement unit
Belt delivery tray for 75 A0
The dispositioner that delivers copies and prints on the
front-side of the machine.
50 - 100 sheets depending on the material.
An optional heater to prevent dampness in media