Oce TDS400 Quick Reference Manual page 45

[12] Remove the roll holder from the drawer
Remove the empty core from the roll holder while you press the knob (see
3
figure 13).
Slide the roll holder in the new roll of material while you press the knob (see
4
figure 13).
You must have the knob on the right side.
Align the paper with the format lines (see figure 13).
5
[13] Press the knob
Align the roll with the correct lines on the roll holder while you press the knob.
6
You must see this line.
Put the roll holder with the material in the drawer (see figure 14).
7
Supplies and maintenance 45