Oce TDS400 Quick Reference Manual page 47

▼
How to load roll 2
Open the cover to access roll 2 (see figure 16).
1
[16] Open the lower paper drawer
Remove the roll holder (see figure 17).
2
[17] Remove the roll holder from the lower paper drawer
Remove the empty core from the roll holder while you press the knob (see
3
figure 13 on page 45).
Slide the roll holder in the new roll of material while you press the knob (see
4
figure 13).
You must have the knob on the right side.
Align the roll with the correct lines on the roll holder while you press the knob.
5
Put the roll holder with the material in the lower paper compartment (see
figure 18).
Supplies and maintenance 47