Installation Of Wrap Around Release Material; Mounting Brackets; Installation Of Splash Shield - Garland MWE3W Service Manual

SERVICE MANUAL

INSTALLATION OF WRAP AROUND RELEASE MATERIAL

MOUNTING BRACKETS

CAUTION: UPPER PLATEN IS EXTREMELY HOT. WARNING: ISOLATE POWER SOURCE TO PREVENT ELECTRICAL SHOCK.
1. Ensure Electrical Power is unplugged before
proceeding to next step.
2. Loosen 2 screws from each side of the platen lid.
3. Position side bracket assemblies over screws and insert
into place.

INSTALLATION OF SPLASH SHIELD

SURFACE OF
GRILL PLATE
NOTE: SOME COMPONENTS OMITTED FOR CLARITY
Page 18
PLATEN ARM
ARM CARRIAGE BLOCK
ARM CARRIAGE BLOCK PIN
SPLASH SHIELD TAB
SPLASH SHIELD
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION
4. Retighten four (4) screws on the platen lid.
Part� Description
Number
4526334 Release Material
sheet Bracket, Side
(3 Platen Grill)
4527294 Release Material
sheet Clip w/ Flange
NOTE: SOME COMPONENTS OMITTED FOR CLARITY
TEFLON
SIDE
MOUNTING
BKT
Qty�Per�Full�Size�
(3P)�Grill
6 Grill, 2 Platen
15 Grill, 5 Platen
SPLASH SHIELD TABS
UP AND OVER
ARM CARRIAGE PINS
IN THIS DIRECTION
PART #4526396 (03/30/10)