Lunch In Auto Mode; Transition Cooking; Product Recognition; To Perform Forced Auto Calibration - Garland MWE3W Service Manual

GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION
OPERATING PROCEDURES (continued)
4. Press the GREEN pushbutton to initiate a cook cycle.
The platen will lower, and recognize the product that
has been loaded on the grill.
5. Alarm will sound when the cook cycle is complete.
6. Remove product and clean grill to prepare for the next
cook cycle.

Lunch In Auto mode

Note:�Switching from breakfast to lunch menu items will
take approximately 10 minutes to heat to the appropriate
temperatures.
1. Select PM mode. Press and hold the
2. Select Auto mode. Press and hold the
control will display "PM / AUTOMATIC. "
3. Following the lay patterns shown on the following
page, load product on the grill.

PRODUCT RECOGNITION

This Garland Clamshell grill is equipped with Product Recognition Controls (PRC). This new technology allows the user to
simply start a cook cycle WITHOUT having to select a specific menu item. The PRC will recognize the product thickness
by utilizing switches inside the upper platen and the magnets mounted on the platen arms. Once the PRC calculates
the thickness of the product that's been loaded, it will look up product from the product range library (below), and
automatically select that product.
MENU�ITEM
Breakfast�Library�Recommended�Ranges
Strip Bacon
Sausage Clam
Steak Clam
While cooking in Automatic Mode, the platen will lower and rest on the top of the product. The platen arms will continue
to move in a downward motion performing various calculations to measure the thickness of the product that has been
placed. In the event "Product�Not�Recognized" or the wrong product is recognized, perform an Forced Auto Calibration.
Performing an Auto Force Calibration will reset the platen to the grill surface.

TO PERFORM FORCED AUTO CALIBRATION

1. PRESS and HOLD the
2. PRESS the button. The "NO" will begin to flash.
3. PRESS the button. The flashing "NO" will change to flashing "YES".
button. The�upper�platen�will�immediately�begin�to�lower�and�perform�an�auto�calibration�routine.
4. PRESS the

PART #4526396 (03/30/10)

button.
button. The
MIN�GAP MAX�GAP
.010 .130
.210 .405
.430 .480
and buttons together. The control will display "AUTO GAP FORCE - NO".
4. Press the GREEN pushbutton to initiate a cook cycle.
The platen will lower, and recognize the product that
has been loaded on the grill.
5. Alarm will sound when the cook cycle is complete
6. Remove product and clean grill to prepare for next
cook cycle.

Transition Cooking

Approximately 30 minutes before changing to the lunch
menu, perform the following:
1. PRESS the button (to display the upper platen
temperature).
2. Press the button.
3. The upper platen indicator will turn on. The upper
platen will heat to 425 degrees F (217 degrees C)
the platen will maintain this set temperature unless
another menu item is selected..
MENU�ITEM
Lunch�Library�Recommended�Ranges
10:1 Clam
4:1 Clam
Strip Bacon
SERVICE MANUAL
MIN�GAP MAX�GAP
.160 .345
.365 .560
.001 .130
Page 25