Installation Of Wrap Around Release Material Mounting Brackets; Installation Of Splash Shield - Garland MWE3W Installation And Operation Manual

GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION
INSTALLATION OF WRAP AROUND RELEASE MATERIAL
MOUNTING BRACKETS
CAUTION: UPPER PLATEN IS EXTREMELY HOT. WARNING: ISOLATE POWER SOURCE TO PREVENT ELECTRICAL SHOCK.
1. Ensure Electrical Power is unplugged before
proceeding to next step.
2. Loosen 2 screws from each side of the platen lid.
3. Position side bracket assemblies over screws and insert
into place.

INSTALLATION OF SPLASH SHIELD

SURFACE OF
GRILL PLATE
NOTE: SOME COMPONENTS OMITTED FOR CLARITY
PART #4521777 (10/09/09)
PLATEN ARM
ARM CARRIAGE BLOCK
ARM CARRIAGE BLOCK PIN
SPLASH SHIELD TAB
SPLASH SHIELD
INSTALLATION/OPERATION MANUAL
4. Retighten four (4) screws on the platen lid.
Part Description
Number
4526334 Release Material
sheet Bracket, Side
(3 Platen Grill)
4527294 Release Material
sheet Clip w/ Flange
NOTE: SOME COMPONENTS OMITTED FOR CLARITY
TEFLON
SIDE
MOUNTING
BKT
Qty Per Full Size
(3P) Grill
6 Grill, 2 Platen
15 Grill, 5 Platen
SPLASH SHIELD TABS
UP AND OVER
ARM CARRIAGE PINS
IN THIS DIRECTION
Page 19