Garland MWE3W Service Manual
Garland gas & electric clamshell grills with product recognition
Hide thumbs
Also See for MWE3W:
- User manual ,
- Installation and operation manual (36 pages) ,
- Operating instructions manual (36 pages)
Table of Contents
Advertisement
SERVICE MANUAL
GARLAND GAS & ELECTRIC
CLAMSHELL GRILLS
WITH PRODUCT RECOGNITION
MODELS:
MWE3W
MWE3S
MWG3W
WARNING:
IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE PROPERTY
DAMAGE, INJURY OR DEATH. READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.
PLEASE READ ALL SECTIONS OF THIS MANUAL AND RETAIN FOR FUTURE REFERENCE.
THIS EQUIPMENT MUST BE INSTALLED AND COMMISSIONED BY A PROFESSIONAL,
FACTORY-TRAINED TECHNICIAN.
THIS EQUIPMENT MUST BE OPERATED UNDER AN APPROVED EXHAUST HOOD SYSTEM ONLY.
NOTE: This manual pertains to all grill models listed above. The reader/operator must interpret its contents
to applicable needs. If you have questions about any instructional materials pertaining to Garland grills,
please contact our Customer Service Department at one of the phone numbers below.
MANUFACTURED EXCLUSIVELY FOR McDonald's BY
GARLAND COMMERCIAL INDUSTRIES, LLC
185 EAST SOUTH STREET FREELAND, PENNSYLVANIA 18224
TOLL FREE: (800) 446-8367 PHONE: (570) 636-1000 FAX: (570) 636-9874
E-mail: clamshell@garland-group.com
http://www.garland-group.com
PART #4526396 (03/30/10)
Advertisement
Table of Contents
Related Manuals for Garland MWE3W
Summary of Contents for Garland MWE3W
- Page 1 NOTE: This manual pertains to all grill models listed above. The reader/operator must interpret its contents to applicable needs. If you have questions about any instructional materials pertaining to Garland grills, please contact our Customer Service Department at one of the phone numbers below.
-
Page 3: Table Of Contents
MWE3W 3~N, 400V, 50Hz........67... - Page 4 The equipment warranty coverage remains in force for two (2) years, (parts and labor), from the date the equipment is put into operation. The Garland Group agrees to repair or replace, at it’s option, any part that proves to be defective in material or workmanship at no charge for the part or normal labor.
- Page 5 External equipotential bonding conductor provided on rear of appliance. Use as applicable, in accordance with local wiring rules. The Garland clamshell grill is a semi-automatic cooking appliance. The upper platen is lowered automatically, following the manual, single-handed initiation of the cooking cycle, and raised automatically upon completion of the cooking cycle.
-
Page 6: Shipping Damage Claim Procedure
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SHIPPING DAMAGE CLAIM PROCEDURE Please note that the Garland equipment was carefully inspected and packed by skilled personnel before leaving the factory. The transportation company assumes full responsibility for safe delivery upon acceptance of the equipment. What to do if the equipment arrives damaged: 1. - Page 7 GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL CLEANING & MAINTENANCE continued • Press green button to • Apply grill cleaner to • Pour remaining McD Hi- • Spread the cleaner • Scrub front side of • Scrub flat grill surfaces lower center platen.
-
Page 8: Specifications
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SPECIFICATIONS Dimensions: Models MWE3W, MWG3W 19.001 7.110 [483mm] [181mm] 4.895 7.111 [124mm] [181mm] 24.000 [610mm] (PLATE DEPTH) 34.968 [888mm] 5.475 36.000 [139mm] [914mm] (PLATE WIDTH) 38.000 4.064 [965mm] [103mm] .737 "COLD ZONE"... -
Page 9: Dimensions: Model Mwe3S
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL SPECIFICATIONS Dimensions: Model MWE3S 21.65 [550mm] PLATE DEPTH 5.475 [139mm] 36.00 [914mm] PLATE WIDTH 32.60 [828mm] 38.00 [965mm] 1.70 [43mm] “COLD ZONE” 48° 1.50 [38mm] 30.714 26.42 [780mm] [671mm] .787 15.384 [20mm] 1.598... -
Page 10: Input Specifications, Electric Grills, United States
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SPECIFICATIONS Input Specifications, ELECTRIC FULL SIZE Grills, MWE3W, United States: NOMINAL�AMPS�PER�LINE TOTAL� SUPPLY� KW� 208V 220V 240V REQUIRED LOAD INPUT�1 7.65 21.3 21.3 21.3 20.1 20.1 20.1 18.4 18.4 18.4 INPUT�2 15.30 42.6... -
Page 11: Input Specifications, Gas Grills, North America
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL SPECIFICATIONS Input Specifications, GAS Grills, North America: LOADING:�(kW/ NOMINAL�AMPS�PER�LINE TOTAL�� PHASE) SUPPLY� kW�� 208V�/�220V�/�240V 208V�/�60Hz 220V�/�60Hz 240V�/�60Hz REQUIRED LOAD L1/L2 L1/L3 L2/L3 INPUT�1 10.0 3.25 3.25 3.25 28.0 28.0 28.0 26.3 26.3 26.3 24.0 24.0 24.0 GAS�INPUT... -
Page 12: Installation & Startup
Once the installation is complete as per the procedures 1. One (1) grill below, a factory authorized service company MUST startup the grill according to Garland Commercial Industries 2. One (1) gas hose (for gas grills only) startup standards. 3. One (1) box containing: A startup DOES NOT include: a. - Page 13 GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL INSTALLATION & STARTUP (continued) 1. Uncrate unit from crating material WARNING: Electrical appliances must be electrically grounded in accordance with local codes or in the absence CAUTION: Prior to installation, check the electrical supply...
-
Page 14: Electrical Cord Hookup
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION INSTALLATION & STARTUP (continued) 5� GAS�GRILL�ONLY,�(for electric grills, skip to step 7): 7. Install grease bucket rails as shown below: Install the included quick-disconnect gas hose to the inlet fitting on the underside of the grill by threading a 3/4”... -
Page 15: Exhaust Hood Type & Platen Height
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL INSTALLATION & STARTUP (continued) Exhaust hood Type & Platen Height With the platens in the raised position, measure the height from the front edge of the platen to the grill surface. Determine which type of exhaust hood the... -
Page 16: Startup Procedure
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION INSTALLATION & STARTUP (continued) Startup Procedure All aspects of the Starup procedure must be documented using the Garland-issued form, part #4521780: This Garland 3-platen grill comes with a factory startup at no GARLAND CLAMSHELL GRILL START –... -
Page 17: Setting The Proper Combustion Levels
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL INSTALLATION & STARTUP (continued) Setting the Proper Combustion levels In order to maintain proper combustion levels, the measurement of uA is not required. Using the following procedure will ensure that the proper O , CO , &... -
Page 18: Installation Of Wrap Around Release Material
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION INSTALLATION OF WRAP AROUND RELEASE MATERIAL MOUNTING BRACKETS CAUTION: UPPER PLATEN IS EXTREMELY HOT. WARNING: ISOLATE POWER SOURCE TO PREVENT ELECTRICAL SHOCK. 1. Ensure Electrical Power is unplugged before 4. Retighten four (4) screws on the platen lid. -
Page 19: Installation Of Release Material
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL INSTALLATION OF RELEASE MATERIAL 1. Slide release material rod through hemmed end of the 6. Repeat step 5 RELEASE release material sheet. with the right MATERIAL side. FLAPS HEMMED RELEASE LOOP 2. Hook release... -
Page 20: Accessories
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION ACCESSORIES Splash�Shield Vapor�Shield�Complete (2 shown) Item 4523492 Item CK4525215 Teflon�Wraparound�kit�(1�platen�only) CK4528080-1 - includes: (3) Teflon Sheet (Wraparound) - 4527643 (5) Clips - 4527294 (1) Teflon Rear Bar - 4521355 Teflon�Wraparound�kit�(3�platens) CK4528080-3 - includes:... -
Page 21: Quick Disconnect Gas Hose
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL ACCESSORIES (continued) NEMA#�51-50P 3Phase�4Wire�50�AMP�Power�Cord�(Electric�Grill�ONLY)� (No Garland P/N) - *** Not supplied by Garland Quick-Disconnect�Gas�Hose Item 1591506 NEMA#�L15-30P 3Phase�4Wire�30�AMP�Power�Cord�(Electric�Grill�ONLY)� (No Garland P/N) - *** Not supplied by Garland NEMA#�L21-20P Interlock�Cord�-�5Wire (No Garland P/N) - *** Not supplied by Garland... -
Page 22: Description Of Grill Control
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION DESCRIPTION OF GRILL CONTROL Right�Arrow�Button�– In any mode, scrolls forward through a list Left�Arrow�Button�– In any mode, scrolls backward through a list Enter�Button�– In the normal operating mode, this button is not active. In the Programming Mode, used to lock in the Power�Button�–... -
Page 23: Operating Procedures
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL OPERATING PROCEDURES General Overview: Upon reaching the AM or PM set temperature (whichever is selected), the grill will stabilize in temperature for fifteen The PRC grill control will allow for 2 functions, both (15) minutes. -
Page 24: Indicator Lights
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION OPERATING PROCEDURES (continued) 4. Following McDonalds procedures for the item selected, when the button is pressed. load product on the grill. Indicator Lights 5. Press the GREEN pushbutton to initiate a cook cycle. -
Page 25: Lunch In Auto Mode
PRODUCT RECOGNITION This Garland Clamshell grill is equipped with Product Recognition Controls (PRC). This new technology allows the user to simply start a cook cycle WITHOUT having to select a specific menu item. The PRC will recognize the product thickness by utilizing switches inside the upper platen and the magnets mounted on the platen arms. -
Page 26: Common Product Recognition Issues
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION COMMON PRODUCT RECOGNITION ISSUES Product Recognition Errors can appear in 2 ways: 1. After initiating cook cycle, the controller displays “PRODUCT NOT RECOGNIZED - NO RECIPE FOUND”. 2. The controller displays the incorrect product for the product that was layed on the grill. -
Page 27: Patty Placement
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL PATTY PLACEMENT This procedure for placement and removal of meat products on the clamshell grill should be followed as indicated below and as follows: 1. Each gray rectangle depicted below represents one cooking; the area beneath one upper platen. - Page 28 SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION BEEF INTEGRITY As shown in the previous page, lay product on the grill in the manner reflected. Product internal temperatures are 10:1�Patties�-�Remove�in�2�stacks�of�4;�Probe�in�center� taken on the corner patties. of�corner�patties�(1,�4,�5,�8) Step�1: Using a store calibrated...
-
Page 29: Control Programming
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL CONTROL PROGRAMMING Programming�Modes;�System�Setup� 6. PRESS the button. The current time unit will flash. To�Change�the�Temperature�Display�Units�� 7. PRESS the arrow buttons to change the (Fahrenheit�/�Celcius) flashing time unit. For�a�complete�listing�of�setup�functions�and�their� The temperature display units (F or C) will change options,�see�section�titled��“FUNCTION�OPTIONS;�... -
Page 30: Programming Modes; Menu Items
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION CONTROL PROGRAMMING (continued) To�activate�/�deactivate�a�menu�item�in�the�Normal� 2. PRESS the arrow buttons TOGETHER. Operating�mode�library,�or�change�its�day-part� “CONFIGURE” will appear in the display. (Defaults are listed in section “OPERATING PROCEDURES”) 3. PRESS the arrow button. “Setup” will appear in the 1. - Page 31 GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL CONTROL PROGRAMMING (continued) To�change�the�grill�upper�platen�set�point�temperature To�Change�the�Toast�Buns�time NOTE: Grill temperature set points are preset in the controller to the 1. Using the button, select the menu item that currently required standard. You should not change this set point to any requires a cook time change.
-
Page 32: To�Restore�Factory�Defaults
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION CONTROL PROGRAMMING (continued) To�Add�NEW�Menu�Items 19. PRESS the button. The gap setting will begin to flash. The following programming instructions serves as a GUIDE for programming the basic settings for CLAM menu items. -
Page 33: Program Logic Tree; Product Menus
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL PROGRAM LOGIC TREE; PRODUCT MENUS (software version 222) Press & Hold (3 seconds) Menu Item Displayed RIGHT or LEFT arrow buttons Scroll Menu Items Product Scroll Scroll Library Forward Backward Select Menu Item... -
Page 34: Program Logic Tree; System Menus
PROGRAM LOGIC TREE; SYSTEM MENUS (software version 222) Press & Hold (3 seconds) Configure Menu Item Displayed Forward RIGHT or LEFT arrow buttons Grill Type Scroll Menu Items Platen Enabled Setup Grill Region Time Then Alarm Product Scroll Scroll Forward Library Backward Cook Zone... -
Page 35: Function Options; System Menus
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL FUNCTION OPTIONS; SYSTEM MENUS (software version 222) SOFTWARE V222 System Menu Sub Menu Options Default Description of Options Configure Menu Electric Grill Type Setting that tells control whether grill is electric or gas. Must be set correctly to identify number of heat zones. -
Page 36: Factory Default Settings
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION FACTORY DEFAULT SETTINGS (software version 222) Clam Menu Items MULTI MUST TOAST TOAST Menu DISPLAY GRILL SET PLATEN INSTANT REMOVE REMOVE TOO COOL PRODUCT STAGE MULTI/PR MULTI REMOVE IN BUNS IN BUNS... -
Page 37: Error Messages/Troubleshooting
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL ERROR MESSAGES/TROUBLESHOOTING DISPLAYED� MEANING POSSIBLE�CAUSES POSSIBLE�SOLUTION MESSAGE Wrong sensor type Identify sensor as “ungrounded type” Poor termination Review wiring instructions GRILL�PROBE� Error for grill temperature Controller not setup for gas OR electric... - Page 38 SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION ERROR MESSAGES/TROUBLESHOOTING�(continued) DISPLAYED� MEANING POSSIBLE�CAUSES POSSIBLE�SOLUTION MESSAGE Shorted temperature sensor Continuity check to ground No temperature increase Solid state relays are not on HEAT�ERROR� � � � � � � � � � � � � � � � � � � � � � � � �...
-
Page 39: Probe Calibration
“FRONT TEMP CAL”. The zones are displayed in order of FRONT TEMP CAL, MIDDLE TEMP CAL, BACK TEMP CAL, TOP TEMP CAL. MWE3W: The electric grill’s thermocouple probes are located front to rear, as shown in the diagram to the right. Each upper platen has one thermocouple in the center. -
Page 40: Platen Leveling (Zeroing)
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION PLATEN LEVELING (ZEROING) In order to ensure that the platen reed switches are in 2) Using a flat screwdriver or the Platen Adjusting tool, their proper location, you must ensure that the distance of remove the platen adjuster grease caps. -
Page 41: To Set The Reed Switches
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL TO SET THE REED SWITCHES In order to ensure that the platen reed switches are in 3) Remove the reed switch locking caps. their proper location, you must ensure that the distance of... -
Page 42: Reed Switch Operation
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION REED SWITCH OPERATION The Motor Speed Control is equipped with LED lights that indicate the state of the reed switches (Both Front and Rear), and the Limit Switches (Both Upper and Lower). The LED light is ON when the state of the switch is OPEN. The LED light is OFF when the state of the switch is CLOSED. - Page 43 GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL REED SWITCH OPERATION (continued) FRONT REAR LOWER�� UPPER� REED REED LIMIT LIMIT Platen in the Up Position – Switches are in NORMAL state. OPEN OPEN OPEN CLOSED Platen movement command has been initiated.
- Page 44 SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION REED SWITCH OPERATION (continued) Explanation of calibration numbers, auto calibration, and other Reed Switch variables. FRONT MAGNETS 441: PLATEN IN THE PARALLEL POSITION 442: PLATEN RESTING ON GRILL PLATE After the platen reaches the parallel position (441), the actuator will continue to run bringing the platen to a resting position on the grill plate as shown (442).
-
Page 45: To Change The Magnet Assembly
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL TO CHANGE THE MAGNET ASSEMBLY 1. Remove grease cap 3. If the magnet does not and lock nut. clear the platen arm assembly, lower the gap adjustment in the front to give clearance for the magnet assembly. - Page 46 SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION TO REPLACE THE LINEAR ACTUATOR (continued) 4. With the weight of the 9. Screw NEW linear platen supported by actuator shaft down the object inserted approximately 2 turns in step 3, use pliers from bottoming out.
-
Page 47: To Update Control Software (Main Control)
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL TO UPDATE CONTROL SOFTWARE (main control) THE FOLLOWING INSTRUCTIONS ARE FOR USE WITH THE GARLAND ZIPGRADER TO UPLOAD NEW CONTROL SOFTWARE INTO WATLOW CONTROL (PN 4522735) AND WATLOW MOTOR CONTROL (PN 4521682). -
Page 48: To Update Control Software (Motor Control)
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION TO UPDATE CONTROL SOFTWARE (motor control) 1. Remove control and kick 3. Begin uploading software panels. Replace control panel. a. Press ZipGraders a. Remove control BLUE button. panel screws to b. Turn grill Power release control panel. -
Page 49: Flexible Gas Line Replacement
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL FLEXIBLE GAS LINE REPLACEMENT THE FOLLOWING INSTRUCTIONS AND WARNINGS ARE FOR THE SAFETY AND SECURITY OF ALL PERSONNEL INCLUDING THE SERVICE TECHNICIAN. ANY DEVIATION OR VARIANCE FROM THE BELOW INSTRUCTIONS CAN BE EXTREMELY HARMFUL AND WOULD COMPROMISE THE SAFETY OF ALL PERSONNEL. - Page 50 SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION ELECTRIC HEATING ELEMENTS (1 of 3 cooking lanes shown) UPPER PLATEN ELEMENTS: ALL GRILLS FRONT OF GRILL 3249�WATTS�TOTAL� (3�ELEMENTS�@�1083�WATTS�EA) LINE� ELEMENT� VOLTS RESISTANCE AMPS AMPS 9.02 5.20 33.95 Ω 8.53 4.92 44.69 Ω...
- Page 51 GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL GAS GRILL SUBSYSTEMS (1 of 3 cooking lanes shown) UPPER PLATEN ELEMENTS: ALL GRILLS FRONT OF GRILL 3249�WATTS�TOTAL� (3�ELEMENTS�@�1083�WATTS�EA) LINE� ELEMENT� VOLTS RESISTANCE AMPS AMPS 9.02 5.20 33.95 Ω 8.53 4.92 44.69 Ω...
-
Page 52: Grill Exterior; All Models
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION PARTS ID: GRILL EXTERIOR; ALL MODELS **Intl Only Page 52 PART #4526396 (03/30/10) -
Page 53: Grill Exterior; All Models
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL PARTS ID: GRILL EXTERIOR; ALL MODELS ITEM PART DESCRIPTION QTY. NUMBER 4522650 BODY BASE, WA 4517928 FRONT PANEL BRACKET, RT 4517929 FRONT PANEL BRACKET, LT 4522707 PLATE WA, GAS 4522653 PLATE WA, ELECTRIC... -
Page 54: Grill Element; Electric Models
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION PARTS ID: GRILL ELEMENT; ELECTRIC MODELS Page 54 PART #4526396 (03/30/10) -
Page 55: Grill Element; Electric Models
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL PARTS ID: GRILL ELEMENT; ELECTRIC MODELS ITEM PART DESCRIPTION QUANTITY NUMBER GRILL ZONE. 4521310 ELEMENT, OUTER, 208V 1300W 4521720 ELMENT, OUTER, 220V 1300W 4521312 ELEMENT, OUTER, 230V 1300W 4521721 ELEMENT, OUTER, 240V 1300W... -
Page 56: Grill Burner; Gas Models
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION PARTS ID: GRILL BURNER; GAS MODELS Alternate con guration prior to 0910100200875 ONE BURNER SHOWN EACH GRILL HAS THREE Page 56 PART #4526396 (03/30/10) -
Page 57: Grill Burner; Gas Models
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL PARTS ID: GRILL BURNER; GAS MODELS ITEM PART DESCRIPTION QUANTITY. NUMBER GRILL PLATEN 4523394 BURNER ASSY NATURAL 4523395 BURNER ASSY LP 4523396 BURNER ASSY CE NAT 4523397 BURNER ASSY CE LP 4525845... -
Page 58: Upper Platen Assembly; All Models
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION PARTS ID: UPPER PLATEN ASSEMBLY; ALL MODELS Shoulder Bolt Magnet Assy Assy 1859102 4521793 1859103 4524062 4524064 1859101 SEE “AVAILABLE ACCESSORIES” PAGE FOR MORE DETAILS Page 58 PART #4526396 (03/30/10) -
Page 59: Upper Platen Assembly; All Models
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL PARTS ID: UPPER PLATEN ASSEMBLY; ALL MODELS ITEM PART DESCRIPTION QUANITITY. NUMBER GRILL PLATEN 4521293 PLATEN ARM ASSEMBLY CK4525497 PLATEN ASSEMBLY; 208V CK4525498 PLATEN ASSEMBLY; 220V CK4525499 PLATEN ASSEMBLY; 230V CK4525500 PLATEN ASSEMBLY; 240V... -
Page 60: Platen Lifting Mechanism; All Models
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION PARTS ID: PLATEN LIFTING MECHANISM; ALL MODELS Page 60 PART #4526396 (03/30/10) -
Page 61: Platen Lifting Mechanism; All Models
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL PARTS ID: PLATEN LIFTING MECHANISM; ALL MODELS ITEM PART DESCRIPTION QTY. NUMBER 4523868 ACTUATOR FRAME, PAINTED 1858199 PILOW BLOCK ASSEMBLY 1858001 ACTUATOR CLEVIS MOUNT 4525541 LINEAR ACTUATOR 1857601 LIMIT SWITCH BRACKET 1855601... -
Page 62: Parts Id: Wiring Harnesses; All Models
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION PARTS ID: WIRING HARNESSES; ALL MODELS 1859803 - 1859833 - P5 DETAIL Main Power Main Power S5 DETAIL Switch Switch Harness Harness - (Molex Plug Molex Plug to to Terminal Switch Block) - Page 63 GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL PARTS ID: WIRING HARNESSES; ALL MODELS 4521770 4521811 - - Terminal Mennekes Block Harness P3 DETAIL Harness - * EXPORT ONLY - Terminal Mennekes JUMPER PINS 1,2,3 Block to socket to JUMPER...
- Page 64 SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION PARTS ID: WIRING HARNESSES; ALL MODELS 4522628 - Main Harness S1 DETAIL RED 3 BLK 7 BRN 50 BLK 14 SHRINK TUBING SHRINK TUBING BLK 4 RED 8 BRN 51 REED SWS...
-
Page 65: Wiring�Schematics
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL 120V CONTROL CIRCUIT; MWE3W Duplicate section for multiple grill section Molex Plug 120V CONTROL CIRCUIT; MWE3W Grill Control Molex Plug Molex Plug Molex Plug Main Contactor Input Motor Control 208/220/230/240 Exhaust - Main Power Switch... -
Page 66: Mwe3W 200/208/220/240V, 60Hz
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION Page 66 PART #4526396 (03/30/10) -
Page 67: Mwe3W 3~N, 400V, 50Hz
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL PART #4526396 (03/30/10) Page 67... -
Page 68: Mwg3W 200/208/220/240V, 60Hz
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION Page 68 PART #4526396 (03/30/10) -
Page 69: Mwg3W 3~N, 400V, 50Hz
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL PART #4526396 (03/30/10) Page 69... -
Page 70: Index
SERVICE MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION INDEX Standard Cooking 22 LEVEL/REED SW mode 39 Standby Mode 21 Lunch 23 Accessories 20 Quick-Disconnect 20 To Select a Menu item 22 Splash Shield 20 Transition 24 Magnet Assembly 39 See also Release... -
Page 71: Service Manual Page
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL INDEX (continued) See also Release Material Sheets Teflon Sheet 20 Temperature set point 12 See Calibration: Probe Calibra- Temperature Calibration tion See also Calibration: Probe Thermocouple(s) 38 Calibration Vapor Shield 20 See Calibration: Platen Zeroing Platen... - Page 72 Service Manual Gas & Electric Clamshell Grills With Product Recognition Garland Commercial Indutries, LLC, 185 East South Street, Freeland, Pennsylvania 18224 Phone: +1 (570) 636-1000 • Fax: +1 (570) 636-9874 TOLL FREE Service Hotline: (800) 446-8367 http://www.garland-group.com • Email: qsrservice@garland-group.com...
Need help?
Do you have a question about the MWE3W and is the answer not in the manual?
Questions and answers
How to replace upper platen conduct with harness replace
To replace the upper platen conductor with harness on the Garland MWE3W:
1. Identify the correct harness: The upper platen harness is part number 1859807 or 1859814, connecting the Molex plug to the upper platen.
2. Disconnect power to the unit to ensure safety.
3. Locate and unplug the Molex connector from the upper platen harness.
4. Carefully remove the existing harness from its routing, noting the connection points.
5. Install the new upper platen harness by connecting the Molex plug to the upper platen and routing the harness as originally installed.
6. Secure the harness and ensure connections are firm.
7. Restore power and test for proper function.
Use caution when handling hot components and avoid damaging the platen surface.
This answer is automatically generated