To�Restore�Factory�Defaults - Garland MWE3W Service Manual

SERVICE MANUAL
CONTROL PROGRAMMING (continued)
To�Add�NEW�Menu�Items
The following programming instructions serves as a GUIDE for
programming the basic settings for CLAM menu items.
1. PRESS and HOLD the
seconds. Controller will display previously selected
menu item and its corresponding item number.
2. PRESS the or button until "Opt menu # - CLAM" is
displayed on the controller.
3. PRESS the button. The controller will display
"PRODUCT"
4. PRESS and HOLD the
menu item name will begin to flash.
5. To spell out the product name:
a. Use the or arrow buttons to scroll through
the character library.
b. PRESS or to scroll right or left.
c. PRESS the button to save the new menu item
name.
6. PRESS the button. "Display Active" will be displayed.
7. PRESS the button. "NO" will begin to flash.
8. PRESS the button. "NO" will change to "YES".
9. PRESS the button to save the new setting.
10. PRESS the button. "GRILL SETPT" will be displayed.
11. PRESS the button. The temperature will begin to
flash.
12. Using the or button, change the temperature set
point to the new desired temperature.
13. PRESS the button to save the new temperature set
point.
14. PRESS the button. "PLATSETPT" will be displayed.
15. PRESS the button. The temperature will begin to
flash.
16. Using the or button, change the temperature set
point to the new desired temperature.
17. PRESS the button to save the new temperature set
point.
18. PRESS the button until "GAP MULTI/PR START"
appears in the display.
Page 32
button for approximately 3
button. The currently select
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION
19. PRESS the button. The gap setting will begin to
flash.
20. Using the and DOWN button, change the gap
setting to the desired setting.
21. PRESS the button to save the new gap setting.
22. PRESS the button 2X to exit and return to the normal
operating mode.
To�Restore�Factory�Defaults�for�All�Product�Menu�Items
1. With the controller display ON and either displaying the
current menu item or displaying "OFF, " PRESS and HOLD
the button for approximately 3 seconds. Controller
will display previously selected menu item and its
corresponding item number OR "Standby / Menu Item. "
2. PRESS the AND arrow buttons TOGETHER.
"CONFIGURE" will appear in the display.
3. PRESS the arrow button. "Setup" will appear in the
display
4. PRESS the button. "Temperature Unit" will appear in
the display.
5. PRESS the button 6x. The controller will display
"Reload Defaults – NO. "
6. PRESS the button. "NO" will begin to flash.
7. PRESS the button. "NO" will change to "YES".
8. PRESS the button. The system will Reload the MENU
items to factory default settings.
9. Wait 15-20 seconds. The control then automatically
returns to OFF mode.
To�Restore�Factory�Defaults�for�All�Functions
1. Ensure the main power is turned off by turning the
main power switch to the OFF mode.
2. PRESS the AND arrow buttons TOGETHER, while
cycling main power ON with the main power switch.
The control will display "PASSWORD"
3. Within 3-5 seconds, press the following keys in this
sequence:
4. Upon successful completion, the controller will display
FULL DEFAULTS
5. Wait 15-20 seconds. The control then automatically
returns to OFF mode.
PART #4526396 (03/30/10)