Programming Modes; Menu Items - Garland MWE3W Service Manual

SERVICE MANUAL
CONTROL PROGRAMMING (continued)
2. PRESS the AND arrow buttons TOGETHER.
"CONFIGURE" will appear in the display.
3. PRESS the arrow button. "Setup" will appear in the
display
4. PRESS the button. "Temperature Unit" will appear in
the display.
5. PRESS the repeatedly until "Audible" appears in the
display.
6. PRESS the button. The currently set Audible will
flash.
7. PRESS the OR arrow buttons to change the
flashing audible options.
For�a�complete�listing�of�setup�functions�and�their�
options,�see�section�titled�"FUNCTION�OPTIONS;�
SYSTEM�MENUS" 
8. PRESS the button to save the current setting.
9. PRESS THE 2X to exit the program mode.
Programming�Modes;�Menu�Items
To�change�the�name�of�an�existing�menu�item
1. Using the or button, select the menu item that
requires a name change.
2. PRESS and HOLD the
seconds. Controller will display previously selected
menu item and its corresponding item number.
3. PRESS and HOLD the
4. To spell out the product name:
a. Use the or arrow buttons to scroll through
the character library.
Character Library:
space ! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H
I J K L M N O P Q R S T U V W X Y Z [ \ ] ^ _ ` a b c d e f g h i j k l m n o p q r
s t u v w x y z
b. PRESS or to scroll right or left.
c. PRESS the button to save the new menu item
name.
5. PRESS the 2X to exit and return to normal operating
mode.
Page 30
button for approximately 3
button.
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION
To�activate�/�deactivate�a�menu�item�in�the�Normal�
Operating�mode�library,�or�change�its�day-part�
(Defaults are listed in section "OPERATING PROCEDURES")
1. PRESS and HOLD the
seconds. Controller will display previously selected
menu item and its corresponding item number.
2. Using the or arrow buttons, select the menu item
that requires activation / deactivation.
3. PRESS the button. The controller will display
"Product". The menu item will flash.
4. PRESS the or arrow buttons until "Display Active"
is displayed on the controller.
5. PRESS the button. The current setting will flash.
6. PRESS the or button to select a different setting.
7. PRESS the button to save the new setting.
8. PRESS the 2X to exit and return to normal operating
mode.
To�change�the�grill�surface�set�point�temperature
NOTE: Grill temperature set points are preset in the controller to the
currently required standard. You should not change this set point to
any temperature other than what is shown in section "OPERATING
PROCEDURES"
1. Using the or arrow buttons, select the menu item
that requires a temperature change.
2. PRESS and HOLD the
seconds. Controller will display previously selected
menu item and its corresponding item number.
3. PRESS the button. The controller will display
"Product".
4. PRESS the or arrow buttons until "Grill SetPt" is
displayed on the controller.
5. PRESS the button. The current grill set temperature
will begin to flash.
6. Using the or button, change the temperature set
point to the new desired temperature.
7. PRESS the button to save the new temperature set
point.
8. PRESS the 2X to exit and return to normal operating
mode.
button for approximately 3
button for approximately 3
PART #4526396 (03/30/10)