Garland MWEFH-9501 Operation Manual
  1. Manuals
  2. Brands
  3. Garland Manuals
  4. Grill
  5. MWEFH-9501
  6. Operation manual

Garland MWEFH-9501 Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

NOTE: This manual pertains to all grill models listed above. The reader/operator must interpret its
contents to applicable needs. However, if there is any question of interpretation of any literature
pertaining to Garland grills, please contact our Customer Service Department at one of the phone
IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE PROPERTY
DAMAGE, INJURY OR DEATH. READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.
PLEASE READ ALL SECTIONS OF THIS MANUAL AND RETAIN FOR FUTURE REFERENCE.
CAUTION: THIS EQUIPMENT MUST ONLY BE OPERATED UNDER AN APPROVED HOOD
SYSTEM
THIS EQUIPMENT "MUST" BE INSTALLED AND COMMISSIONED BY A PROFESSIONAL
FACTORY TRAINED TECHNICIAN
MODEL NUMBERS
MWE-9501
MWE-9801
MWEH-9501
MWEH-9801
MWEF-9501
MWEL-9501
MWER-9501
MWEFH-9501
OPERATIONS MANUAL
INTERNATIONAL
MANUFACTURED EXCLUSIVELY FOR
McDonald's
GARLAND COMMERCIAL INDUSTRIES, INC.
185 EAST SOUTH STREET
FREELAND, PENNSYLVANIA 18224
TOLL FREE: (800) 446-8367
PHONE: (570) 636-1000
FAX: (570) 636-9874
Come visit us on the web at
www.garland-group.com
E-mail:
clamshell@garland-group.com
numbers listed above.
WARNING:
BY
Rev 5 P/N 1881001 IN(060104)
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MWEFH-9501 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Garland MWEFH-9501

Summary of Contents for Garland MWEFH-9501

  • Page 1 NOTE: This manual pertains to all grill models listed above. The reader/operator must interpret its contents to applicable needs. However, if there is any question of interpretation of any literature pertaining to Garland grills, please contact our Customer Service Department at one of the phone numbers listed above.

  • Page 3: Table Of Contents

    Table of Contents Table of Contents WARRANTY ............................................5 INTRODUCTION ..........................................5 SAFETY ..............................................5 SHIPPING DAMAGE CLAIM PROCEDURE ..............................6 CLEANING AND MAINTENANCE ..................................6 FULL SIZE ELECTRIC GRILL MODEL MWE-9501 ..........................8 SPECIFICATIONS ........................................... 8 HALF SIZE ELECTRIC GRILL MODEL MWEH-9501 ..........................
  • Page 4 TABLE OF CONTENTS To Enable High Limit Test - PLATEN (Chip V. 3.52 and 4.0* ONLY) ....................29 TO ADD / PROGRAM NEW MENU ITEMS ..............................30 To Add / Program an [Option Menu - CLAM] ............................30 To Add / Program an [OPTION MENU - FLAT] ........................... 31 PROBE CALIBRATION ......................................

  • Page 5: Warranty

    DO NOT operate the grill without reading this operation manual. The Garland Group agrees to repair or replace, at it's option, any part that proves to be defective in material or DO NOT operate the clamshell grill unless it has workmanship at no charge for the part or normal labor.

  • Page 6: Shipping Damage Claim Procedure

    Suitable protective clothing SHIPPING DAMAGE CLAIM PROCEDURE should be worn to prevent the risk of burns. Please note that the Garland equipment was carefully WARNING: This appliance must not be cleaned with a inspected and packed by skilled personnel before leaving water jet.
  • Page 7 raise and lower the upper platens, (for clamshell grills), bullnose with a LONGLIFE( pot brush or equivalent to alternate positions for proper cleaning of the platen high-temperature brush. Continue until the water no edges. longer boils away and the grill remains wet. Squeegee dry.

  • Page 8: Full Size Electric Grill Model Mwe-9501

    SPECIFICATIONS [610mm] 37-3/4 [959mm] 19-29/32 [505mm] 14-5/16 [965mm] [363mm] 42-11/32 51° [1076mm] 1-1/2 [38mm] 28-9/16 22-5/16 [725mm] [567mm] 1-5/8 31-21/64 30-3/4 [781mm] 15-27/64 [41mm] [796mm] [392mm] 33 [838mm] 4-1/16 [103mm] COOKING HEIGHT VENT FAN INTERFACE 3/4 DIA 32-3/64 [19mm] 1-63/64 [50mm] [814mm] 11/32 [9mm]...

  • Page 9: Half Size Electric Grill Model Mweh-9501

    SPECIFICATIONS [610mm] 37-3/4 [959mm] 19-29/32 [505mm] 14-5/16 [508mm] [363mm] 42-11/32 51° [1076mm] 28-9/16 1-1/2 [38mm] 1-1/2 [38mm] [725mm] 22-5/16 [567mm] 30-3/4 [781mm] 30-3/4 [781mm] 15-27/64 1-5/8 31-21/64 [392mm] [41mm] [796mm] 33 [838mm] 33 [838mm] COOKING HEIGHT COOKING HEIGHT 14-3/64 2-59/64 26-1/4 1-63/64 [50mm] 1-63/64 [50mm]...

  • Page 10: 2/3 "Slim Grill" Model Mwe-9801

    SPECIFICATIONS 16-1/2 [419mm] 30-1/4 [768mm] 19-29/32 [505mm] [965mm] 6-13/16 [173mm] 42-11/32 51° [1076mm] 1-1/2 [38mm] 1-1/2 [38mm] 28-9/16 [725mm] 22-5/16 30-3/4 [781mm] 30-3/4 [781mm] [567mm] 15-27/64 1-5/8 23-53/64 [392mm] [41mm] [605mm] 33 [838mm] 33 [838mm] COOKING HEIGHT COOKING HEIGHT 32-3/64 18-3/4 2-59/64 1-63/64 [50mm]...

  • Page 11: 2/3 "Slim Grill" Half Size Model Mweh-9801

    SPECIFICATIONS 16.5000 [419mm] 16.5000 [419mm] 30-1/4 [768mm] 19-29/32 [505mm] [508mm] 6-13/16 [173mm] 42-11/32 51° [1076mm] 1-1/2 [38mm] 1-1/2 [38mm] 28-9/16 [725mm] 22-5/16 30-3/4 [781mm] 30-3/4 [781mm] [567mm] 15-27/64 1-5/8 23-53/64 [392mm] [41mm] [605mm] 33 [838mm] 33 [838mm] COOKING HEIGHT COOKING HEIGHT 14-3/64 2-59/64 18-3/4...

  • Page 12: Full Size Flat Grill Model Mwef-9501

    SPECIFICATIONS 24” (610mm) 37-3/4” (959mm) 38” (965mm) 28-9/16” (725mm) 1-1/2” (38mm) 20-21/64” (516mm) 30-3/4” (781mm) 15-27/64” 31-21/64” 1-5/8” (392mm) (796mm) (41mm) 33” (838mm) COOKING HEIGHT 2-59/6” 1-63/64” 32-3/64” 26-1/4” (74mm) (50mm) (814mm) (667mm) 36” 23”(584mm) (914mm) BOTTOM CABLE ENTRANCE FULL SIZE FLAT GRILL MODEL MWEF-9501 KW LOAD NOMINAL AMPERES PER LINE VOLTS...

  • Page 13: Release Material Installation

    RELEASE MATERIAL INSTALLATION The following procedures are the procedures for installing the teflon sheets on to the upper platen on the Garland Clamshell grill. The components shown below are included with your grill when purchansed. 1. Slide release material rod through hemmed end of the 4.

  • Page 14: Release Material Installation (Optional)

    RELEASE MATERIAL INSTALLATION (OPTIONAL) NOTE: TEFLON ROLLUP BAR ASSEMBLY’S ARE SEPARATE FOR LEFT AND FOR RIGHT. NOTE THE “L” OR “R” STAMPED ON THE BRACKET ASSEMBLY FOR CORRECT POSITIONING. WARNING: UPPER PLATEN TEMPERATURES ARE VERY HOT. PLATEN SHOULD BE COOL WHILE INSTALLING 1.
  • Page 15 RELEASE MATERIAL INSTALLATION (OPTIONAL) 6. Install existing rod through opening on teflon sheet as previously done with existing rod and sheet. 7. Clip existing teflon bar in rear of platen as previously done with existing rod and sheet. 8. Fold corner edges of front of teflon sheet approximately 1 inch on top and side, and insert folded sheet through opening in Teflon rollup.

  • Page 16: Unit Installation

    2-SPEED FAN INTERFACE INFORMATION (STANDARD AND WESTERN CANADA) This unit is equipped with a 2-speed fan interface (Grills 2-speed activation will occur at the following times: manufactured post grill serial number 0010CL0036). McDonalds stores built post May 2000 are equipped with LOW SPEED (all active AFTER (1) ONE MINUTE) the capability of a 2-speed interface.
  • Page 17 UNIT INSTALLATION Lim Lim Com 115 115 Mennekes 7 pin Socket / Plug The Mennekes 7-pin Socket it used in International Units -CE, -H, -ME, -FR, and -K. As shown in the diagram to the left, the Mennekes socket/ plug is used to bring both single, and three phase voltage to the unit.

  • Page 18: Clamshell Grill Controls

    CLAMSHELL GRILL CONTROLS "STANDBY" "CANCEL/RAISE PLATEN" BUTTON BUTTON "COOKING TIME COUNTDOWN START" (WHEN PUSHED SIMULTANEOUSLY - FLAT GRILL COOKING ONLY) "LOWER PLATEN" BUTTONS (WHEN PUSHED SIMULTANEOUSLY - CLAM MODELS ONLY) START (ON) DISPLAY UPPER STOP (OFF) REAR CENTER MASTER POWER "READY"...

  • Page 19: Description Of Grill Controls

    DESCRIPTION OF GRILL CONTROLS General Overview 2) In the program mode, it will change the value of the The grill control will allow for 2 functions, both described in current cursor digit, (see "RIGHT ARROW" button). the following sections. Right Arrow Button - Two Functions The “Normal Operating Mode”, also known as the Cook 1) In the program mode various displayed parameters will Mode is the mode in which is used during normal cooking.

  • Page 20: Normal Operating Modes

    DESCRIPTION OF GRILL CONTROLS Standby Button - Black Cancel / Raise Button - Green When both "STANDBY" and "CANCEL/RAISE" buttons From the "STANDBY" mode, pushing this button will are pressed simultaneously, the upper platen will lower to the cancel "Standby" and raise platen. During the cooking cycle, griddle surface.

  • Page 21: Standby Mode

    NORMAL OPERATING MODES 4. When the cooking time has been completed, the display To Display the Current Temperature will flash "REMOVE" with an audible alert. Remove product per the prescribed method. 1. PRESS the "TEMP" button and repeat for each zone to be displayed.

  • Page 22: To Clean The Grill

    NORMAL OPERATING MODES To Clean the Grill: Multi-Stage Cooking 1. PRESS the "MENU" button to obtain the menu "CLEAN If you have version 7.30 EPROM chip software, your MODE." (The controls will maintain the proper cleaning controller is equipped with the new Multi-stage cooking temperature).

  • Page 23: Program Logic Chart

    PROGRAM LOGIC CHART The diagram below is a graphical representation of the control’s menu structure in the program modes. The following pages detail the various programming procedures. After you become more familiar with these procedures, this diagram will serve as a quick reference to the program functions and the key sequences needed to access them.

  • Page 24: To Display Temperatures In F Or C

    PROGRAMMING SYSTEM SETUP To Display Temperatures in F or C To Change the Gap Calibration 1. PRESS and HOLD the “PROG” button for five, (5), 1. PRESS and HOLD the "PROG" button for five, (5), seconds. (Display will flash GC450 and the program seconds.

  • Page 25: To Change Start Delay Timer

    PROGRAMMING SYSTEM SETUP To Change Start Delay Timer To Change the Standby Alert Feature - EPROM 1. PRESS and HOLD the "PROG" button for five, (5), Chip Ver. 6.20 and higher seconds. (Display will flash GC450 and the program version number). 1.

  • Page 26: Menu Items

    PROGRAMMING MENU ITEMS To Add or Delete a Menu Item To Change the Remove Time 1. PRESS and HOLD the “PROG” button for five, 5 1. PRESS and HOLD the “PROG” button for five, 5 seconds. (Display will flash GC450 and the program seconds.

  • Page 27: To Change The Sear Time

    PROGRAMMING 6. PRESS the “UP ARROW” button (↑) to change the To Change the Sear Time setting (AUTO/MANUAL). The following procedure IS ONLY AVAILABLE and can 7. PRESS the “PROG” button to display “MENU only be changed in FLAT MENU ITEMS. ITEMS”.

  • Page 28: To Change Turn Time

    PROGRAMMING MENU ITEMS ITEMS”. 4. PRESS the “FUNCTION” button until “TURN IN XXX” is displayed. 8. PRESS the “RIGHT ARROW” button (→) to return to the normal OPERATING MODE. NOTE: IF TURN IN IS NOT DISPLAYED ON THE CONTROLLER, ENSURE THAT THE CURRENT PRODUCT SELECTED IS A FLAT MENU ITEM To Change Turn Time 5.

  • Page 29: To Change The Upper Platen Set Temperature

    PROGRAMMING MENU ITEMS To Enable High Limit Test - GRILL SURFACE To Change the upper platen set temperature (Chip V. 3.52 and 4.0* ONLY) 1. PRESS and HOLD the “PROG” button for five, 5 1. PRESS and HOLD the “PROG” button for five, 5 seconds.

  • Page 30: To Add / Program New Menu Items

    PROGRAMMING MENU ITEMS TO ADD / PROGRAM NEW MENU ITEMS 17. PRESS the “RIGHT ARROW” button ( → ) to advance To Add / Program an [Option Menu - CLAM] the cursor to the right for changing its value. 1. PRESS and HOLD the “PROG” button for five, (5), seconds.

  • Page 31: To Add / Program An [Option Menu - Flat]

    PROGRAMMING MENU ITEMS 17. PRESS the “RIGHT ARROW” button (→) to move the To Add / Program an [OPTION MENU - FLAT] cursor, (blinking digit), to the required digit position. 1. PRESS and HOLD the “PROG” button for five, (5), seconds.

  • Page 32: Probe Calibration

    PROBE CALIBRATION MWE-9501, MWEH-9501 (FULL SIZE & HALF SIZE UNITS WITH 4 ZONES PER HALF) THIS CALIBRATION PROCESS SHOULD BE DONE AT LEAST ONCE EVERY 2 WEEKS B.FRONT TEMP 350 F Model MWE-9501, MWEH-9501 Bi-Weekly Calibration of Grill Temperature Zones FUNCTION Tools: Digital Pyrometer with Surface Probe MENU...
  • Page 33 PROBE CALIBRATION MWEF-9501, MWEFH-9501 (FULL SIZE & HALF SIZE FLAT UNITS WITH 3 ZONES PER HALF) 5. Select a heat zone display, and then place the surface THIS CALIBRATION PROCESS SHOULD BE DONE AT probe of the digital pyrometer directly on the grill at the LEAST ONCE EVERY 2 WEEKS same heat zone.

  • Page 34: Optional Accessories

    OPTIONAL ACCESSORIES Teflon Sheet - 1799301 Teflon Rear Rod - 1851201 Teflon Clip - 1851301 Teflon Rollup Assembly Left Assy - 1853799 Reight Assy - 1853798 Grill Squeegie - 1858201 Splash Shield - 1873703...

  • Page 35: Troubleshooting

    TROUBLESHOOTING POSSIBLE ERROR MESSAGES “Probe Open” “High Limit” An open probe condition has occurred. The controller will Occurs when: turn the heater controlled by the malfunctioning probe OFF. If the open probe condition should correct itself; the control 1. The Controller senses a zone at 465( F (241( C) will return to the ''IDLE MODE ''.

  • Page 36: In Store Troubleshooting Guide

    TROUBLESHOOTING In Store Troubleshooting Guide NEW VERSION EPROM CHIP? RE-INITIALIZE UNIT CONTROLLER DISPLAYS EEPROM FAULTY EPROM CHIP OR CALL FOR SERVICE CORRUPT FAULTY CONTROLLER. GRILL HAS NOT REACHED ALLOW GRILL TO REACH SET SET TEMPERATURE YET. TEMPERATURE. UPPER PLATEN LOCKING PIN PULL OUT UPPER PLATEN IS ENGAGED LOCKING PIN.
  • Page 37 NOTES...

  • Page 38: Controller Menu Items

    CONTROLLER MENU ITEMS THE FOLLOWING TABLE LISTS MENU ITEMS DEFAULTED IN THE MAIN CONTROLLER AS NEW. TO REPROGRAM ANY FUNCTION OR FEATURE BELOW, SEE PROGRAMMING. ** THE MENU ITEMS LISTED BELOW ARE FOR EPROM CHIP VERSIONS UP TO 6.20 - FOR EPROM CHIP VERSION 7.XX, PLEASE SEE THE FOLLOWING TABLE FOR MORE INFORMATION ** ** TO IDENTIFY YOUR EPROM CHIP, PRESS AND HOLD THE PROG BUTTON THE CONTROLLER ** Eprom Chip...
  • Page 39 CONTROLLER MENU ITEMS Turn/Sear Sausage - FLAT (THD) NONE Remove Turn/Sear Sausage - FLAT (FRZ) NONE Remove Turn Hotcakes - FLAT NONE Remove Turn Ham - FLAT NONE Remove Stir Sausage Burrito - FLAT NONE Remove Option Menu 1 - CLAM Remove .469 Option Menu 2 - CLAM...

  • Page 40: Controller Menu Items (Eprom Chip Ver. 7.Xx)

    CONTROLLER MENU ITEMS (EPROM CHIP VER. 7.XX)
  • Page 41 CONTROLLER MENU ITEMS (EPROM CHIP VER. 7.XX)

  • Page 42: Temperature Conversion (F / C)

    TEMPERATURE CONVERSION (F / C)
  • Page 43 TEMPERATURE CONVERSION (F / C)

  • Page 44: Manual Corrections And Modifications

    Suggestions or improvements to this manual: __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ Fax to 570-636-9874 - or - Mail to: Garland Commercial Industies McDonalds Sale / Service Account 185 East South Street Freeland, PA 18224 Thank you for your continued support! Garland P/N 1881001 REV5IN(060104)
  • Page 45 NOTES...
  • Page 46 NOTES...
  • Page 47 NOTES...
  • Page 48 ® Rev 5 P/N 1881001 IN(060104)

This manual is also suitable for:

Mwer-9501Mwel-9501Mwef-9501Mweh-9801Mweh-9501Mwe-9801 ... Show all

Table of Contents