Motorola RFS7000 Series Reference Manual page 52

2-22 Overview
prompt (crash-info)
radius (restart)
set (command-history
<10-300>|reboot-history
<10-100>|
upgrade-history <10-100>)
show (cli)
terminal-length <0-512>
Example
RFS7000#service diag ?
enable Enable in service diagnostics
led LED control
limit diagnostic limit command
period Set diagnostics period
RFS7000#service diag enable
RFS7000#service diag limit ?
buffer buffer usage warning limit
fan Fan speed limit
filesys file system freespace limit
load agregate processor load
maxFDs maximum number of file descriptors
pkbuffers packet buffer head cache
procRAM percent RAM used by a process
ram percent free RAM
routecache IP route cache usage
temperature temperature limit
RFS7000#service diag limit buffer ?
128 128 byte buffer limit
128k 128k byte buffer limit
16k 16k byte buffer limit
1k 1k byte buffer limit
256 256 byte buffer limit
2k 2k byte buffer limit
32 32 byte buffer limit
32k 32k byte buffer limit
4k 4k byte buffer limit
512 512 byte buffer limit
64 64 byte buffer limit
64k 64k byte buffer limit
8k 8k byte buffer limit
RFS7000#service diag limit buffer 32k ?
<0-65535> buffer usage warning limit 0-65535
RFS7000#service diag limit buffer 32k 4096
RFS7000#service diag limit fan ?
<1-3> Fan number
RFS7000#service diag limit fan 1 ?
Enables crash-info prompt.
Enables the RADIUS Server.
Set service parameters.
• command-history <10-300> – Sets the size of the command history. The
default value is 200.
• reboot-history <10-100> – Sets the size of the reboot history. The default
value is 50.
• upgrade-history <10-100> – Sets the size of the upgrade history. The
default value is 50.
Displays running system information.
• cli – Shows the CLI tree of current mode.
System wide terminal length configuration.
• <0-512> – Number of lines of VTY (0 means no line control).