13-8
Overview
13.1.7 no
mst Config commands
Use this command to negate a command or set defaults.
Syntax
no [instance|name|revision]
Parameters
instance
name
revision
Usage Guidelines
The
command negates any command associated with it. Wherever required, use the same parameters
no
associated with the command getting negated.
Example
RFS7000(config-mst)#no instance 10 vlan 20
RFS7000(config-mst)#
RFS7000(config-mst)#no name MyRegion
RFS7000(config-mst)#
RFS7000(config-mst)#no revision
RFS7000(config-mst)#
Instance.
MST region.
Revision number for configuration information.