Motorola RFS7000 Series Reference Manual page 364

12-26 Overview
trunk native (tagged |
vlan <1-4094>)
Usage Guidelines
The interface ge1-ge4 can be configured either as trunk or in access mode. An interface configured as trunk
allows packets from the given list of VLANs added to the trunk. Interfaces configured as access allow packets
only from the native VLANs.
Use
[no] switchport (access|mode|trunk)
Example
RFS7000(config-if)#switchport mode access
RFS7000(config-if)#
Configures the native VLAN ID of the trunk-mode port.
• tagged – Sets the native VLAN for classifying untagged traffic.
• vlan <1-4094> – Sets the native VLAN for classifying untagged traffic
when the interface is in trunking mode.
to undo the above switchport configurations.