Motorola RFS7000 Series Reference Manual page 225

Parameters
access-list
default-gateway
dhcp
domain-lookup
domain-name
http
name-server
Use the access list parameter to enter the
context. The prompt changes to the context entered.
For additional information, see
extended ACLs) and Standard ACL Instance on page 15-1
Configures the default gateway.
• A.B.C.D – IP gateway address.
DHCP Server configuration.
• bootp – BOOTP specific configuration.
• ignore – Configures the DHCP Server to ignore BOOTP requests.
• class – Defines a DHCP class and enters DHCP class configuration mode.
• WORD – DHCP class name.
• excluded-address – Prevents the DHCP Server from assigning certain
addresses.
• A.B.C.D – Low IP Address.
• option – Defines the DHCP server option name.
• ping – Specifies the ping parameters used by DHCP server.
• timeout – Specifies a ping timeout between 1-10 seconds.
• pool – Configures the DHCP Server address pool.
• restart – Restarts DHCP Server to get the DHCP config changes into
effect.
Enables DNS based name - to - address translation on the switch.
Sets the domain name for the switch.
Hyper Text Transfer Protocol (HTTP).
• secure-server – Secure HTTP server (HTTPS).
• secure-trustpoint – Enter the name of the trustpoint to be used for secure
connection.
• server – HTTP server.
Specify the DNS server for the DHCP client. A maximum of 6 name servers can
be configured. Servers are tried in the order entered.
• A.B.C.D – IP address of Name Server to add.
context and
ext-nacl
Extended ACL Instance on page 14-1
5-29
std-nacl
(for
(for standard ACLs).