Step 2: Configuring The Netgear Prosafe Vpn Client On The Remote Pc - NETGEAR ProSafe FVG318 Reference Manual
Wireless 802.11g vpn firewall
Hide thumbs
Also See for ProSafe FVG318:
- Reference manual (202 pages) ,
- Configuration manual (11 pages) ,
- Features manual (11 pages)
Table of Contents
Advertisement
Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
3. Click Done on the Summary screen (see
The VPN Policies menu below displays showing that the new tunnel is enabled.
Figure 6-8
To view or modify the tunnel settings, select the radio button next to the tunnel entry and click
Edit.
Step 2: Configuring the NETGEAR ProSafe VPN Client on the
Remote PC
This procedure describes how to configure the NETGEAR ProSafe VPN Client. This example
assumes the PC running the client has a dynamically assigned IP address.
The PC must have the NETGEAR ProSafe VPN Client program installed that supports IPSec. Go
to the NETGEAR Web site (http://www.netgear.com) and select VPN01L_VPN05L in the Product
Quick Find drop-down menu for information on how to purchase the NETGEAR ProSafe VPN
Client.
6-10
Figure
6-6) to complete the configuration procedure.
v1.0, October 2005
Basic Virtual Private Networking
Advertisement
Table of Contents
Troubleshooting
