How To Check Vpn Connections - NETGEAR ProSafe FVG318 Reference Manual

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
4. Set up the FVG318 VPN -Auto Policy illustrated below.
Figure 7-10
a. From the main menu VPN section, click on the VPN Policies link, and then click on the
Add Auto Policy button.
b. Configure the IKE Policy according to the settings in the illustration above and click
Apply to save your settings. For more information on IKE Policy topics, please see
Policies' Automatic Key and Authentication Management" on page
5. After applying these changes, all traffic from the range of LAN IP addresses specified on
FVG318 A and FVG318 B will flow over a secure VPN tunnel.

How to Check VPN Connections

You can test connectivity and view VPN status information on the FVG318 (see also
Control" on page 6-29).
7-20
WAN IP
address
LAN IP
addresses
v1.0, October 2005
7-3.
Advanced Virtual Private Networking
"IKE
"VPN Tunnel