Configuring The Prosafe Vpn Client For Modeconfig - NETGEAR FVX538 - ProSafe VPN Firewall 200 Router Reference Manual
Vpn firewall
Hide thumbs
Also See for FVX538 - ProSafe VPN Firewall 200 Router:
- Reference manual (222 pages) ,
- Reference manual (242 pages)
Table of Contents
Advertisement
10. Click Apply. The new policy will appear in the IKE Policies Table (a sample policy is shown
below)
Figure 5-26
Configuring the ProSafe VPN Client for ModeConfig
From a client PC running NETGEAR ProSafe VPN Client software, configure the remote VPN
client connection.
To configure the client PC:
1. Right-click the VPN client icon in the Windows toolbar. In the upper left of the Policy Editor
window, click the New Policy editor icon.
a. Give the connection a descriptive name such as "modecfg_test" (this name will only be
used internally).
Virtual Private Networking
ProSafe VPN Firewall 200 FVX538 Reference Manual
v1.0, March 2009
5-33
Advertisement
Table of Contents
Troubleshooting
