NETGEAR ProSafe FVG318 Reference Manual page 37

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
You can manually configure the firewall using the Basic Settings menu shown in
using these steps:
1. Log in to the firewall at its default address of http://www.routerlogin.net using a browser like
Internet Explorer or Netscape
2. Click the Basic Settings link under the Setup section of the main menu.
3. If your Internet connection does not require a login, click No at the top of the Basic Settings
menu and fill in the settings according to the instructions below. If your Internet connection
does require a login, click Yes, and skip to step 4.
a. Account:
Enter your Account Name (may also be called Host Name) and Domain Name.
These parameters may be necessary to access your ISP's services such as mail or news
servers.
b. Internet IP Address:
If your ISP has assigned you a permanent, fixed (static) IP address for your PC, select
"Use static IP address". Enter the IP address that your ISP assigned. Also enter the
netmask and the Gateway IP address. The Gateway is the ISP's firewall to which your
firewall will connect.
c. Domain Name Server (DNS) Address:
If you know that your ISP does not automatically transmit DNS addresses to the firewall
during login, select "Use these DNS servers" and enter the IP address of your ISP's
Primary DNS Server. If a Secondary DNS Server address is available, enter it also.
d. Firewall's MAC Address:
Note: After completing the DNS configuration, restart the computers on your
This section determines the Ethernet MAC address that will be used by the firewall on the
Internet port. Some ISPs will register the Ethernet MAC address of the network interface
card in your PC when your account is first opened. They will then only accept traffic from
the MAC address of that PC. This feature allows your firewall to masquerade as that PC
by "cloning" its MAC address.
To change the MAC address, select "Use this Computer's MAC address." The firewall
will then capture and use the MAC address of the PC that you are now using. You must be
using the one PC that is allowed by the ISP. Or, select "Use this MAC address" and
enter it.
Connecting the Firewall to the Internet
®
Navigator.
network so that these settings take effect.
v1.0, October 2005
Figure 3-10
3-13