Step 2: Configuring The Netgear Prosafe Vpn Client On The Remote Pc - NETGEAR ProSafe FVS114 Reference Manual

Step 2: Configuring the NETGEAR ProSafe VPN Client on the
Remote PC
This procedure describes how to configure the NETGEAR ProSafe VPN Client. This example
assumes the PC running the client has a dynamically assigned IP address.
The PC must have the NETGEAR ProSafe VPN Client program installed that supports IPSec. Go
to the NETGEAR Web site (http://www.netgear.com) and select VPN01L_VPN05L in the Product
Quick Find drop-down menu for information on how to purchase the NETGEAR ProSafe VPN
Client.
Note: Before installing the NETGEAR ProSafe VPN Client software, be sure to turn off
any virus protection or firewall software you may be running on your PC.
Install the NETGEAR ProSafe VPN Client on the remote PC and reboot.
1.
You may need to insert your Windows CD to complete the installation.
a.
If you do not have a modem or dial-up adapter installed in your PC, you may see the
b.
warning message stating "The NETGEAR ProSafe VPN Component requires at least one
dial-up adapter be installed." You can disregard this message.
Install the IPSec Component. You may have the option to install either the VPN Adapter
c.
or the IPSec Component or both. The VPN Adapter is not necessary.
The system should show the ProSafe icon (
d.
Double-click the system tray icon to open the Security Policy Editor.
e.
Add a new connection.
2.
Note: The procedure in this section explains how to create a new security policy from
scratch. For the procedure on how to import an existing security policy that has already
been created on another client running the NETGEAR ProSafe VPN Client, see
"Transferring a Security Policy to Another Client" on page
Run the NETGEAR ProSafe Security Policy Editor program and create a VPN
a.
Connection.
From the Edit menu of the Security Policy Editor, click Add, then Connection. A "New
b.
Connection" listing appears in the list of policies. Rename the "New Connection" so that it
matches the Connection Name you entered in the VPN Settings of the FVS114 on LAN A.
Basic Virtual Private Networking
Reference Manual for the ProSafe VPN Firewall FVS114
) in the system tray after rebooting.
202-10098-01, April 2005
5-17.
5-9