NETGEAR ProSafe FVG318 Reference Manual page 163

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
4. Click Apply to have your changes take effect.
5. When accessing your firewall from the Internet, the Secure Sockets Layer (SSL) will be
enabled. You will enter https:// and type your firewall's WAN IP address into your browser,
followed by a colon (:) and the custom port number. For example, if your WAN IP address is
134.177.0.123 and you use port number 8080, type the following in your browser:
https://134.177.0.123:8080
If you do not use the SSL https://address, but rather use http://address, the FVG318 will
automatically attempt to redirect to https://address.
Note: The first time you remotely connect the FVG318 with a browser via SSL, you
may get a message regarding the SSL certificate. If you are using a Windows
computer with Internet Explorer 5.5 or higher, simply click Yes to accept the
certificate.
Tip:
Tip: If you are using a dynamic DNS service such as TZO, you can always identify
the IP address of your FVG318 by running
menu Run option. For example, type tracert yourFVG318.mynetgear.net
and you will see the IP address your ISP assigned to the FVG318.
Advanced Configuration
v1.0, October 2005
from the Windows Start
TRACERT
9-9