Configuring Static Routes - NETGEAR ProSafe FVG318 Reference Manual

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
1. Click the button next to the reserved address you want to edit or delete.
2. Click Edit or Delete.

Configuring Static Routes

Static Routes provide additional routing information to your firewall. Under normal
circumstances, the firewall has adequate routing information after it has been configured for
Internet access, and you do not need to configure additional static routes. You must configure
static routes only for unusual cases such as multiple firewalls or multiple IP subnets located on
your network.
From the Main Menu of the browser interface, under Advanced, click on Static Routes to view the
Static Route table shown below.
Figure 9-2
To add or edit a Static Route:
1. Click the Add button to open the Add/Edit menu, shown below.
Figure 9-3
9-6 Advanced Configuration
v1.0, October 2005