NETGEAR ProSafe FVG318 Reference Manual page 38

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
e. Click Apply to save your settings.
4. If your Internet connection does require a login, fill in the settings according to the instructions
below. Select Yes if you normally must launch a login program such as Enternet or WinPOET
in order to access the Internet.
Note: After you finish setting up your firewall, you will no longer need to launch
the ISP's login program on your PC in order to access the Internet. When
you start an Internet application, your firewall will automatically log you
in.
a. For connections that require a login using protocols such as PPPoE, PPTP, Telstra Bigpond
Cable broadband connections, select your Internet service provider from the drop-down
list.
Figure 3-11
b. The screen will change according to the ISP settings requirements of the ISP you select.
c. Fill in the parameters for your ISP according to the Wizard-detected procedures starting on
page 3-11.
d. Click Apply to save your settings.
3-14 Connecting the Firewall to the Internet
v1.0, October 2005