How To Log On To The Fvg318 After Configuration Settings Have Been Applied - NETGEAR ProSafe FVG318 Reference Manual

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
How to Log On to the FVG318 After
Configuration Settings Have Been Applied
1. Connect to the wireless VPN firewall by typing http://www.routerlogin.net in the address
field of your browser, then press Enter.
Figure 3-7
2. For security reasons, the firewall has its own user name and password. When prompted, enter
admin for the firewall user name and password for the firewall password, both in lower case
letters. To change the password, see
Note: The firewall user name and password are not the same as any user name or
password you may use to log in to your Internet connection.
A login window like the one shown below opens:
Figure 3-8
Connecting the Firewall to the Internet
"Changing the Administrator Password" on page
v1.0, October 2005
8-8.
3-9