Humidify and Air Purifying Operations
●
Do not move the unit while it is running. Displacements may cause
water leaks, damage or malfunctions.
1
Press
2
Press
•
If humidifi cation was run the last time that the unit was used, the humidifi cation lamp lights automatically.
3
Press
•
Each time the button is pressed, the humidify setting changes as follows.
LOW
STD
4
Press
•
Each time the button is pressed, the airfl ow rate changes as follows.
•
The fan will be set to auto mode if the HIGH, STD, or LOW humidity setting is selected while in humidifying operation. The airfl ow rate
setting cannot be select.
•
To set the airfl ow rate, set the humidify setting "CONT". Humidifying capacity increases alongside airfl ow rate.
•
When set to "auto", airfl ow rate is automatically adjusted according to the dirty state of the air and humidity in the air.
ATTENTION
●
As water is supplied from the water tank to the humidifying tray, the sound may be heard, but there is nothing wrong with the unit.
●
If the set humidity is reached or the water supply lamp lights during humidifi cation, humidifi cation stops, but air purifying operation
continues.
●
Humidifi cation rate varies according to the airfl ow rate setting.
Humidification lamp
3
4
.
to light the humidifi cation lamp.
to change the humidify setting.
HIGH
CONT
to change the airfl ow rate.
2
1
Air purifying operation is in active
while humidifying operation.
(Humidifi cation cannot run by itself.)
NOTE
●
Be sure to install the humidifying
fi lter to run the unit.
20