Daikin MCK75JVM-K Operation Manual page 19

After attaching the fi lter
1
Restore the deodorizing catalyst unit.
• Holding the deodorizing catalyst unit by the handle, fi t the
projections on the unit into the grooves (4 locations) at the
bottom of the main unit and press the deodorizing catalyst
unit into the main unit.
(1)
Fit here.
(2)Press inward until
Deodorizing catalyst unit
2
Restore the UNIT1.
• Holding UNIT1 by the handle, fi t the projections on the unit
into the grooves (2 locations) at the bottom of the main
unit, and press UNIT1 into the main unit.
Pre-filter
(2)Press inward until
UNIT1
3
Restore the water tank.
• Holding the water tank by the handle, fi t the tank into the
hole at the bottom of the main unit, and press the tank into
the main unit.
(1)
Fit here.
Water tank
(2)Press inward until
hearing clicking sound.
(1)
Fit here.
hearing clicking sound.
hearing clicking sound.
4
Restore the front panel.
• Fit the tabs (2 locations) at the bottom of the panel into the
grooves at the bottom of the main unit, and close the
panel.
[View from above]
(1)
Fit here.
Bottom grooves
(2 locations)
Front panel
To correctly restore the front panel, press the
front panel until hearing the clicking sound from
the left and right sides.
Unless properly installed, a safety switch may trip
and prevent the unit from starting.
NOTE
● Always run the unit with both a pre-fi lter (green) and pleated
fi lter (front: white, back: blue).
Running the unit without both fi lters may lead to damage.
(2)Press inward until
hearing clicking sound.
Page 27.
18