Printing The Tx Report (Tx Report) - NEC ViVid Office 2020 Quick Reference Manual

Printing the TX Report
(TX Report)
The TX Report can be used to check the document number, TX start time, duration, destination, communication
mode, number of pages transmitted, and transmission results.
Before Starting
Operations
Printing the TX Report
1 Press <Utility/Counter>.
2 Touch [Print Lists].
3 Touch [TX Report].
This section describes how to manually print out the report.
●
The machine is set to automatically print out this report after 50 transmissions (by fac-
●
tory default setting).
By setting the software switch, you can specify the way of printing the report output
●
when executing serial broadcast transmission. Refer to Operation Manual (Network
Application).
4 Touch [OK].
The TX Report is printed.
The report is automatically printed out
ADD.
even if [OK] is not touched.
3-2