NEC ViVid Office 2020 Quick Reference Manual page 49

Touch this area to scroll up
and left.
Touch this arrow to scroll left.
When you reach the left end, it
will shift to the right end of the
line above.
Touch this area to scroll down
and left.
Accessibility Settings Screens
■ Accessibility Settings Screen
You may not operate other buttons while <Enlarge Display> button is blinking.
You may operate the Touch Panel in the enlarged mode.
Touch this arrow to scroll up.
Touch this arrow to scroll down.
By setting the software switch, you can change the screen display method when operating
the Touch Panel during Enlarge Display. Refer to Operation Manual (Copy).
Set various settings for the Accessibility Settings feature.
Press <Accessibility> to display the Accessibility Settings screen.
When the Accessibility Settings feature is active, [Enable] is highlighted, and the red
●
light on the <Accessibility> button is on.
Touch [Disable] to cancel the Accessibility Settings feature and go back to the original
●
screen. (<Accessibility> button lamp will turn off.)
To activate configured settings collectively
If various settings are already configured, press <Accessibility> to activate those set-
tings collectively, and the red light on the <Accessibility> button is lit.
If you want to cancel the Accessibility Settings feature, press <Accessibility> and then
●
touch [Disable] on the Accessibility Settings screen. (<Accessibility> button lamp will
turn off.)
Touch this area to scroll up
and right.
Touch this arrow to scroll right.
When you reach the right end,
it will shift to the left end of the
next line.
Touch this area to scroll down
and right.
1-17
Accessibility Settings Feature
1