Setting Time Format; Setting Local Time; Leaving Date & Time Setup - Raymarine ST70+ Operating Manual

18

Setting time format

To set the required time format:
1. With the Time & Date setup menu displayed,
scroll to select the Time Format option, then
OK
press
2. Scroll to the required Time Format, then press
OK
to save the format and return to the Time &
Date summary page.
OK
3. Press

Setting local time

Note:
If your ST70+ display is connected to a Raymarine multi-
function display, then the time offset is controlled by the
multifunction display and you cannot use this procedure
to change it.
To set the display time to your local time.
1. At the Time & Date setup menu, use
select the Set time offset option, then press
to display the Set time offset page.
2. Scroll to set the correct local time. For
example, if your local time is 1 hour after GMT,
set -1.
OK
3. Press
Time & Date setup menu.
Leaving date & time setup
When your date and time formats and values are
set as required:
1. At the Time & Date setup menu, scroll to the
Continue option.
OK
2. Press
page.
3. Proceed from Data units (below).
to display the Set time format page.
to select the Time & Date setup menu.
, to save the setting and return to the
to proceed to the Units summary
ST70+ User Reference Manual
Time & Date
10
Set time format
Use < & > to adjust.
i
CANCEL exits without saving.
Time & Date
< >
and to
OK
,
Set time offset
Use < & > to adjust.
i
CANCEL exits without saving.
Time & Date
Set time format
Press OK to select
12-hour
Press OK to accept
Set time offset
Press OK to select
-1 hour
Press OK to accept
10
Continue
Press OK to select