Gybe Inhibit; Wind Type; Windtrim Response; Setting Up Fishing Patterns - Raymarine ST70+ Operating Manual

56

Gybe inhibit

With gybe inhibit disabled:
• You will be able to perform an AutoTack into the wind
• The autopilot will not perform an AutoTack away from the wind, to prevent acci-
dental gybes
With gybe inhibit enabled, you can perform an AutoTack into or away from the wind.
To set Gybe inhibit:
1. With the Sailboat settings menu displayed, use the Preliminary procedure above
to display the Gybe inhibit page.
2. Scroll to the required setting.
OK
3. Press

Wind type

Note:
Only available if wind data is available.
Use the Wind type page to determine whether the boat steers to apparent or true wind
in Wind Vane mode. To do this:
1. With the Sailboat settings menu displayed, use the Preliminary procedure above
to display the Wind type page.
2. Scroll to select either True or Apparent as required.
OK
3. Press

WindTrim response

WindTrim response determines how quickly the autopilot responds to changes in the
wind direction. Higher response settings make the autopilot more responsive to wind
changes.
The values are:
• 1 to 3 - Least responsive to wind changes, therefore less autopilot activity.
• 4 to 6 - Moderate response to wind changes
• 7 to 9 - Most responsive to wind changes, therefore more autopilot activity.
To set the WindTrim response:
1. With the Sailboat settings menu displayed, use the Preliminary procedure above
to display the WindTrim response page.
2. Scroll to the required setting.
OK
3. Press

Setting up fishing patterns

Fishing patterns are available on Power and Fishing Boat vessel types. You can
change the parameters of any fishing pattern to obtain the coverage you want.
.
For each pattern, you can set the direction of travel
to save the setting and return to the Drive settings menu.
to save the setting and return to the Drive settings menu.
to save the setting and return to the Drive settings menu.
ST70+ User Reference Manual