Technical Data - Nilfisk-Advance Supreme 100 Instructions For Use Manual

How to replace battery at the hose handle
1) Open the lid of the battery holder
by sliding the lid towards the
front of the hose handle.
2) Replace the used batteries with
two new ones, type 1.5V AAA.
Make sure the polarity of the
batteries is placed correct at the
bracket.
3) Slide the battery lid back until
you hear a click.
13

Technical data

Technical data, machine
Maximum Airwatts at motor
Maximum Airwatts at hose end
Maximum Amps Draw
Maximum Electric Watts
Maximum Suction (kPa)
Maximum Airflow (liter/sec.)
Dimension inches (HxWxD)
Weight
Sound power (IEC 704-2)
Sound pressure (ISO 11203)
Technical data, handle
Radio frequency
Function
Lifetime of battery
Battery type, qty.
Range of operation
*Measured on the suction unit
These appliances conform with EU Instructions 2004/108/EC, 2006/95/EC.
20
Supreme 100 Supreme 150
595 595
240 240
12.3 12.3
1450 1450
28.8 18.8
54.7 54.7
17"x14"x16" 32"x14"x16"
12 lbs 14.5 lbs
66 dB 66 dB
53 dB 53 dB
LED
On/off, power regulation 5 steps,
LED indication of operation status
3 years
Supreme 250 Supreme LCD
684 684
250 250
15 15
1750 1750
30.3 30.3
57.6 57.6
32"x14"x16" 32"x14"x16"
14.5 lbs 15.0 lbs
66 dB 66 dB
53 dB 53 dB
LCD
433 MHz
On/off, power regulation 5 steps,
LCD indication of operation status
3 years
1.5 V AAA, 2 pcs.
Max 50 metres
Supreme 240V
727
255
7.8-240V
1850
30.8
59.5
32"x14"x16"
15.0 lbs
66 dB
53 dB