Supreme Lcd Display - Nilfisk-Advance Supreme 100 Instructions For Use Manual

Supreme 150 / Supreme 250
If this happens - unplug the main power cord to reset the
vacuum cleaner. Wait 5-10 minutes to allow the machine
to cool down. While you are waiting, check the hose, dust
bag and fi lter to be sure that nothing is blocking the fl ow
of air through the machine. The vacuum cleaner should
now start again. If the cut-out trips again, you need to get
a service fi rm to remedy the fault.
Supreme LCD
When the overheat symbol in the display on the cleaner is
activated (models with display) the cleaners' thermal cut-
out has tripped. For more information regarding thermal cut
out, see Overheat indicator.

6.3 Supreme LCD Display

The Supreme LCD model has a display giving information
about the machine, Fig. 23.
Airflow
Wireless Temperature
Dustbag/Filter
Speed level
When the start button is pushed or the hose is
connected to the wall socket, the display will turn on
and show the speed level.
Dust bag/bag fi lter indicator
When the dust bag/fi lter symbol starts to fl ash dur-
ing operation, the cleaner tells you that it is almost
time to clean the bag fi lter and replace the dust bag When
it is time to do so, symbol will be lit continuously. The dust
bag/fi ler symbol will be lightened after every 20 operation
hours of the cleaner at the latest. If the symbol is lit, do
like this: Turn off the cleaner by the hose handle (remote
versions) or remove the suction hose from the wall inlet or
by pushing the on/off switch on the display. Then check if
the bag fi lter/dust bag is clogged. Replacement is de-
scribed in chapters
7.1, 7.2, 7.3 and 7.4.
Reduced airfl ow indicator - lit
The reduced airfl ow symbol on the display indi-
cates that the airfl ow through the vacuum cleaner
is reduced. After 30 seconds of operation with reduced
airfl ow, the vacuum motor will be shot down in order
to prevent damage to the motor. If the reduced airfl ow
Fig. 23
Service
Speed
symbol is lit and the motor has been shot down, do like
this: Check the bag fi lter and dust bag (see chapters
to see if anything is blocking the airfl ow.
7.2, 7.3 and 7.4)
Remove the material causing the reduced airfl ow symbol
to indicate.
Service indicator
When the service symbol starts fl ashing, the mo-
tor will run for one more hour before it stops/will
not start. The purpose of the service symbol is to inform
you that it is time to order service of the cleaner. When
the symbol is continuously lit, the run time counter in the
cleaner has counted that the allowed amount of run time
has passed. You must now contact an authorised service
workshop and let them perform a service of the cleaner and
to reset the run time counter.
Overheat indicator - fl ashing
The overheat symbol indicates that the cleaner has
become overheated. The cleaner stops automati-
cally. Unplug the main power cord to reset the vacuum
cleaner and wait 5-10 minutes to allow the machine to
cool down. While you are waiting, check the hose, dust
bag and fi lter to be sure that nothing is blocking the fl ow
of air through the machine.
Signal indicator - fl ashing
When the symbol is fl ashing, the hose handle is out
of range and there is no connection to the cleaner.
The cleaner will automatically stop after 30 min. if the hose
handle or the cleaner has not been activated.
7.1,
11