Main Menu - Datavideo DN-600 Instruction Manual

Main Menu

There are 8 options in this first level of the menu system and they are:
Pressing the NEXT soft key will bring up the next option in the menu. In turn each menu option will be
displayed. Choosing NEXT on the last menu item will return you to the first option in the current menu
list. Table 1 below details the actions for each Main Menu Level option.
Menu Option
MAKING MEDIA FILES
EMPTY THIS BIN
SELECT SOURCE
EMPTY ALL BINS
RECORD SETUP
PLAY SETUP
SYSTEM SETUP
FIRMWARE REVISION
MAKING MEDIA FILES
EMPTY THIS BIN
SELECT SOURCE
EMPTY ALL BINs
RECORD SETUP
PLAY SETUP
SYSTEM SETUP
FIRMWARE REVISION
This action needs to be taken before connecting the removable HE-1
drive enclosure to an editing computer. It prepares the previously
recorded video and audio content on the HE-1 drive to be seen by a
computer by wrapping the data in a pre-selected file wrapper like avi or
mov.
Empties or erases the video and audio content within the current BIN.
This step cannot be undone once the final question has been asked.
When in DV [Standard Definition] mode, the signal to be recorded can
be chosen to come either from the Digital DV IEEE-1394 input (DIG) or
from the CVBS Composite BNC input as an NTSC or PAL compatible
analogue signal (ANA).
Note that the current selection will be marked with an asterisk [*].
Also ANA or DIG will be displayed on the first line of the LCD panel.
Empties or erases the content in ALL of the BINS. This step cannot be
undone once the final question has been asked.
Enters the Record Setup Menu group detailed in the named section
Enters the Play Setup Menu group detailed in the named section
Enters the System Setup Menu group detailed in the named section
Displays the current revision of the recorder's firmware
13
Action taken
Table 1 Menu Main Level