Removing And Mounting The He-1 Drive Enclosure To A Computer - Datavideo DN-600 Instruction Manual

Removing and mounting the HE-1 drive enclosure to a Computer

Note: The MAKING MEDIA FILES menu process must be undertaken with the recorder before
removing and connecting the HE-1 drive enclosure to a computer with a USB 2.0 cable.
Turn the drive lock lever to the right to unlock the HE-1 drive enclosure. Push the HE-1 into the unit
and when released it will pop out a few centimetres. Gently pull the drive caddy clear of the recorder.
You may feel some slight resistance as the drive disconnects internally – this is normal.
The HE-1 drive enclosure is fitted with a mini USB connector on its rear; this can provide power to the
HDD, as well as allow the exchange of data.
Note: With some PCs and Laptops the USB bus power may not be enough to power the drive.
If the drive does not power up correctly please connect the second USB lead to another USB
port on your computer / Laptop.
Connect the supplied mini USB to USB A cable to the HE-1 drive caddy, and connect the double lead
to your PC or Laptop. If the drive does not power up correctly – connect the second USB connector to
the computer as well as the first.
The drive will appear on the computer as a volume called MediapacXX. Where XX is the number
value set up using HDD Volume ID feature as described on page 16.
25