Working With A Fixed Or Single Audio Source; Switching Between Different Embedded Audio Sources - Datavideo HS-2200 Instruction Manual

Hd/sd 6-channel portable video studio

Hide thumbs Also See for HS-2200:

Table of Contents

HDMI Inputs Embedded Audio

Stereo Pair

Stereo pair 1

Stereo pair 2

Stereo pair 3

Stereo pair 4

In some cases there may only be two channels of audio associated with the video: Stereo Pair 1.

Working with a fixed or single audio source

Example 1:

We have two mono mics (channels 1 & 2) connected to an HD camera. These embedded audio channels

are then sent from the output of this camera (HD-SDI) to the HS-2200 switcher. If we want to only hear

these two audio channels regardless of the video channel used then we would set up the switcher in the

following way.

Press the ENTER key in the MENU area of the HS-2200 keyboard to display the on screen menu on the

AUDIO ASSOCIATION of AUDIO SETTING.

Change the Audio Association settings in the menu system to show a value of 1 for each video input

channel. Press the ENTER key to store the audio values chosen for each video input.

Change the SDI Embedded Audio setting in the switcher's menu system to show a value of Group 1 and Pair

1. Press the ENTER key to store the audio values chosen for each video input.

Now exit the menu by pressing any wipe key and look at the AUDIO FIXED button in the wipes area of the

keyboard.

Select the AUDIO FIXED status with this button when looking at the status area of the HDMI multi-view.

The button will be backlit red.

Example 2:

We have two mono mics each connected to a different HD camera. The embedded audio is then output

from each camera, HD-SDI, to the HS-2200 switcher. If we want to hear the audio from each camera as the

video channels are switched, audio follows video, and then we would set up in the following way.

Press the ENTER key in the MENU area of the HS-2200 keyboard to display the on screen menu on the

AUDIO ASSOCIATION of AUDIO SETTING.

Change the Audio Association settings in the menu system to show a value of 1 for each video input

channel that is associated with audio input 1. Then change to a value of 2 each video input channel that is

associated with audio input 2. Press the ENTER key to store the audio values chosen for each video input.

Channel

Table of Contents