Subscribe to Our Youtube Channel
Related Manuals for Jet DC-650TS
Summary of Contents for Jet DC-650TS
- Page 1 OWNER'S MANUAL DC-650TS Dust Collector JET EQUIPMENT & TOOLS, INC. A WMH Company www.jettools.com P.O. BOX 1349 Auburn, WA 98071-1349 e-mail jet@jettools.com Phone:253-351-6000 Fax: 1-800-274-6840 M-708630 08/01...
-
Page 2: Warranty
This manual has been prepared for the owner and operators of the JET DC-650TS. Its purpose, aside from machine operation, is to promote safety through the use of accepted correct operating and maintenance procedures. Completely read the safety and maintenance instructions before operating or servicing the machine. -
Page 3: Warnings
Use only as described in this manual. Use only manufacturer’s recommended attachments. Do not use with damaged cord or plug. If Dust Collector is not working as it should, has been dropped, damaged, left outdoor, or dropped in water, return it to a service center. -
Page 4: Grounding Instructions
115 Volt Operation As received from the factory, your dust collector is ready to run at 115 volt operation. This dust collector, when wired for 115 volt, is intended for use on a circuit that has an outlet and a plug that looks like the one illustrated in (A). -
Page 5: 230 Volt Operation
230 volt plug is installed. 4. The dust collector with a 230 volt plug should only be connected to an outlet having the same configuration (D). No adapter is available or should be used with the 230 volt plug. -
Page 6: Table Of Contents
Grounding Instructions... 4 115 Volt Operation... 4 230 Volt Operation... 5 Specifications ... 6 Table of Contents ... 6 Unpacking DC-650TS ... 7 Contents of Shipping Carton ... 7 Tools Required for Assembly ... 7 Assembly... 8 Electrical Connections ... 9 Turning the Machine On &... -
Page 7: Unpacking Dc-650Ts
Tools Required for Assembly 2. 10mm Wrenches or sockets 1. #2 Cross Point Screw Driver The JET DC-650TS does not come with a collector can. You can use the JET two stage dust collector on a variety of round, metal and plastic collector cans. -
Page 8: Assembly
Failure to comply may result in serious injury! The JET DC-650TS does not come with a collector can. You can use the JET two stage dust collector on a variety of round, metal and plastic collector cans. -
Page 9: Electrical Connections
DC-650TS dust collector 115V/230V, Prewired 115V. If you want to run the DC-650TS on 230V refer to the wiring diagram found on the inside of the switch box cover (A, Fig. 4). Before hooking up to the power source, make sure that the switch is in the off position. - Page 10 Emptying the Collector Can 1. Disconnect the machine from the power source, unplug. 2. Lift the dust collector off the collector can (B, Fig. 5). 3. Dispose of the contents in the collector can. Use the proper type hose (C, Fig. 5) to connect the dust collector to the machine being operated.
-
Page 11: Parts Breakdown And Parts List
Parts Breakdown... - Page 12 ...DC650TS-NP ... Name Plate (not shown) ..1 ...DC650TS-WL ... Warning Label (not shown) ..1 ...DC650TS-HP ... Hardware Package (not shown) ..1 * indicates included in Hardware Package (#) indicates quantity included in Hardware Package Parts List for the DC-650TS Size Qty.
-
Page 13: Wiring Diagram
Wiring Diagram...
Need help?
Do you have a question about the DC-650TS and is the answer not in the manual?
Questions and answers