Table of Contents
Advertisement
HOW TO INSTALL
G.
The Sash locator must be used to position the sash portion of the lap-sash seat
belt across the child's shoulders and chest. Choose the shoulder harness
nearest to the shoulder height of the child.
H.
Pull sash locator through back of the restraint and then feed it back into your
chosen slot position nearest the sash of the seat belt.
I.
Connect the sash of the seat belt to the sash locator clip at shoulder height.
J.
Adjust lap and sash portion of seat belt firmly but comfortably across the child's
lap and chest and then pull the harness adjustment strap to move sash guide so
that the guide sits comfortably over your child's shoulder.
K.
If using the Inertia Reel Retractor seat belt, adjust the lap portion of the seat belt
firmly around the child and restraint, then let the slack sash portion retract up
into the sash retractor.
L.
If possible, adjust the vehicle seat to improve the position of the sash on the
child's chest.
M.
When not using the restraint, secure in position by engaging the seat belt over
the seat.
IMPORTANT: If fitted, the Anti-Submarining clip should be used when the child is
using the Booster Seat. Always ensure the seat belt is correctly restraining the
child on the restraint.
TO REMOVE CHILD
Disengage seat belt tongue and buckle, remove the lap
portion of seat belt from the Anti Submarining clip,
remove the sash locator from the sash portion of seat
belt and remove belt from child.
When Booster is not being used, secure in
position, by engaging seat belt over the
booster seat.
NOTE: Do not use this Booster
Seat if the child's eye level is
above the top of the Booster
Seat back or vehicle headrest
(which ever is highest) when the
child is seated.
Forward Facing (14 kg up to 26 kg)
21
Hide quick links:
Advertisement
Table of Contents
