Britax Maxi Rider Instructions For Installation & Use page 14

FOR
TODDLER
USE
PLACING TODDLER IN THE RESTRAINT
A. Lengthen harness by pressing Harness
Adjustment button while pulling on either
shoulder strap until the harness will
accommodate the child.
Pull to
lengthen
Press & hold
Harness
Adjustment
Button.
C. Fit either harness buckle tongues
into the harness buckle followed
by the other tongue until a click
is heard. Should the second
tongue not insert - press the red
button and reinsert the tongues.
Ensure secure engagement by
pulling harness straps.
D. Ensure slack is removed from harness lap strap by pulling
shoulder straps then pull harness adjustment strap to adjust
harness to a comfortable but firm fit. Ensure that any slack in
harness straps is removed. Shoulder Harness Straps must fit
firmly to the child. A loose harness could result in serious injury
in an accident.
Do not use restraint if straps do not tighten and contact your
local authorised service agent for repair.
TO REMOVE TODDLER
Press red button on harness buckle then both harness tongues will be released. Lift the
shoulder straps from the child's shoulders.
14
Forward Facing (8 kg to 18 kg)
HOW TO USE
B. Place child in the restraint and feed
each arm through shoulder straps.
Pull harness buckle up between
child's legs.
Front of vehicle
Pull harness
adjuster strap
to tighten.
Shoulder
Strap
Harness
Lap Strap
Crotch Straps
Click
Pull to remove slack
from Harness Lap Strap