Table of Contents
Advertisement
HOW TO SETUP
CONVERTING INTO CHILD BOOSTER
To use this child restraint as a booster seat the harness needs to be stored under
the cover.
Upper anchorage strap must be used in booster position.
Do not disengage the upper anchorage strap from the anchor fitting.
Disengage and remove the seat belt from the restraint.
STORING ACCESSORIES IN SEAT RECESS
When used as a Booster seat, the accessories for child use are found in storage
recesses under the cover, as shown below.
Sash Locator
Anti-Submarining
TODDLER USE
STORING THE HARNESS
A.
Disengage harness buckle. Fully
lengthen the harness by pressing the
Harness Adjustment Button and pulling
the harness shoulder straps.
Clip
CHILD USE with Anti-Submarining Clip
B.
Forward Facing (14 kg up to 26 kg)
Place rolled-up Harness Strap
and Harness Tongue in recess
and Sash Locator
At the rear of the restraint, remove
both of the harness shoulder straps
from metal Strap Connector by
slipping strap through open slot. The
metal Strap Connector is shown in
diagram below.
Strap Connector
17
Hide quick links:
Advertisement
Table of Contents
