Britax Maxi Rider Instructions For Installation & Use page 30

SHOULDER PADS
Shoulder Pads are designed to provide extra comfort for baby or child and are easily fitted to the
shoulder harness straps by:
A. Pull apart fasteners and remove shoulder pads from harness.
B. Re-fit shoulder pads to harness and attach fasteners for use.
COVER
(STYLE MAY VARY)
The cover has been designed to protect your child when seated in the restraint. Care should be
taken if children either eat or drink while in the restraint as some food or drink products may cause
damage or marking to the cover.
IMPORTANT: Do not pull sticky items from covers as the cover may be damaged - soak in water
and gently remove.
HEAD PILLOW
The Head Pillow is designed to snugly support the toddler or child for extra comfort.
If fitting Head Pillow for toddler use, fit straps
through either pair of Upper Shoulder Strap
Slots and over the top of the restraint as
shown right. Slide Head Pillow up or
down to rest above the shoulder strap
slots being used.
CUP HOLDERS
The Booster Seat has a cup holder on either
side of the seat. Swing the cup holder out from
the seat to use. Ensure the cup holder and its
contents can not be crushed by the car door.
Fold away when not in use.
WARNING: Only use for holding cups, bottles
and drink cartons. Do not use for hot drinks
30
For Toddler & Child Use.
ACCESSORIES & FEATURES
(IF FITTED)
(IF FITTED)
(IF FITTED)
Head Pillow straps should be
over the top of the Restraint and
through either pair of top slots.
Upper Slots
suitable for
Head Pillow straps
ARMREST
The armrest can be raised to make it
easier to place the child in the seat and
can be in the down position when the child
is seated and secured.
Head Pillow
straps
(IF FITTED)