Britax Maxi Rider Instructions For Installation & Use page 26

USING WITH CHILD HARNESS
The Protecta™ Child
Safety Harness should always be used
in either the top harness slots or top
child safety harness slots (where
provided).
Front of vehicle
FOR LARGE CHILDREN
Once your child's shoulders are above the top slots, then it is suitable to use the protecta™
child safety harness over the top of maxi rider™ seat (see below right).
NOTE: Do not use this Booster Seat if the child's eye level is above the top of the Booster Seat back
or vehicle headrest (which ever is
highest) when the child is seated.
Eye-line level with
Maxi Rider™ seat
back.
Front of vehicle
RESTORING THE RESTRAINT FOR TODDLER USE
A. Disengage seat belt tongue from buckle and pull seat belt out of harness strap loops.
B. Disconnect the Harness attachment clip from the Versa-
Tether™ Catch and feed the LH Harness Strap out the
shoulder slot. Pull the RH harness Strap to remove the
harness off the seat. (Store the Protecta™ Child Safety
Harness in a safe place for later use).
C. Remove the built-in harness from the storage recess under
the cover. Feed crotch strap and shoulder straps through
seat cover.
D. Feed shoulder straps through appropriate shoulder slots in
the seat back and attach to metal Strap Connector as
shown right.
26
Forward Facing (14 kg up to 26 kg)
NOTE: The Child Safety Harness must be in
the slots which are level with or above the
child's shoulders.
OR
(Not Supplied)
Eye-line level with
car seat headrest if
close enough to
support head from
whiplash is also
permitted provided
shoulder strap
support and child
weight is still within
required limits.
Strap Connector