Britax Maxi Rider Instructions For Installation & Use page 12

FOR
TODDLER
USE
E. Engage car seat belt buckle and
tongue. Push down on the restraint
while pulling on the lap portion to
remove all slack from the belt. Then,
pull the remaining slack in the sash
belt and allow excess belt to feed back
into the retractor.
NOTE: Some vehicle seats have more
rearward slope than others. Use a
rolled up towel or padding under the
seat for contoured vehicle seats to
prevent excessive recline.
F. To lengthen the Upper Anchorage
Strap, fully press Adjuster Button (A)
while pulling Upper Anchorage Strap
(B) to slacken as shown below.
Storage
Strap
H. Pull Upper Anchorage Adjustment Strap to remove slack. Fold up excess strap and use
storage strap to neatly store excess strap behind seat. See illustration on following page.
12
Forward Facing (8 kg to 18 kg)
A B
Pull Adjustment
Strap to remove slack
HOW TO INSTALL
Engage
seatbelt
G. Fit the Attachment Clip to the Anchor
Fitting making sure to remove as many
twists as possible.
Remove
Slack
Vehicle
seat
belt
Anchor
fitting
Attachment
Clip & Cover