Britax Maxi Rider Instructions For Installation & Use page 29

ACCESSORIES & FEATURES
WARNING
ONLY USE SAFE-N-SOUND SEAT COVERS THAT ARE DESIGNED AND TESTED FOR
USE WITH THIS PRODUCT.
The following instructions apply to accessories that may
be supplied with this restraint at point of purchase. If
not, a variety of accessories are available from
various retailers of Safe-n-Sound products.
POCKET
(IF FITTED)
The pocket sewn on the trim is designed
for your convenience. It can hold those
necessary items that you need at a
moments notice. e.g Bottle, face
washer, toy etc.
Caution: If using the pocket to store filled
bottles, please ensure contents are not
contaminated due to prolonged storage.
CROTCH PAD
The Crotch Pad is designed to provide
extra comfort for baby or child and is fitted
to the restraint as follows: Feed Crotch
Buckle through the slot in crotch pad as
shown.
MESSY MAT™ SEAT PROTECTOR INSTRUCTIONS
SUPPLIED)
Place ribbed or pocket end of
the Messy Mat™ seat
protector on edge of car seat,
smooth back toward seat join
('A') and fit in any excess
Messy Mat™ into the join of
the car seat ('A').
Hook and loop attachment
referred in some instruction
books, are no longer required
to fit this model of Messy Mat™
seat protector.
CAUTION: The pocket
is only for small, light
items. DO NOT overload the pocket with heavy, bulky items as this may
damage the pocket or cause passengers to trip over them.
PADDED INSERT
The Padded Insert is designed to snugly support the baby for extra comfort. Simply
place the padded insert on the restraint between Harness straps and the restraint
back. Ensure padded insert is lined up with or below the shoulder straps.
(IF FITTED)
Long Messy Mat™
'A'
(IF FITTED)
Crotch Pad
Messy Mat
Short Messy Mat™
Ribs
Pockets
(Where Fitted)
For Toddler & Child Use
Pocket
(IF
Ribs
'A'
Pockets
(Where Fitted)
29