How To Install - Britax Maxi Rider Instructions For Installation & Use

HOW TO INSTALL

INSTALLING INTO VEHICLE
(UPRIGHT OR RECLINED)
A. Determine whether an upright or
reclined installation is preferred as
shown right.
B. To move the Recline Foot from upright to reclined mode or vice versa. Pull the Foot outwards
to unlock it, then rotate the foot. Push to lock in place. See diagrams below.
C. Position restraint centrally to the chosen position in forward facing mode and align restraint
centrally to the chosen seating position as shown on page 14. Some vehicle seat fabrics
(particularly velours) may be damaged by a child
restraint used continuously. We recommend the use
of a thick towel or other protection to keep the
vehicle seat in good condition.
D. Fully lengthen lap or lap sash seat
belt and insert through near seatbelt
slot. Ensure the seatbelt is between
the trim and seat back as you push
the seatbelt out through the far
seatbelt slot.
(FORWARD FACING)
Recline Foot
position
for upright
installation.
Pull Out.
Seatbelt feeds
through slot in seat
between trim and
seat back.
Near seatbelt slot.
Recline Foot
position
for reclined
installation.
UPRIGHT
Rotate.
Forward Facing (8 kg to 18 kg)
FOR
TODDLER
USE
RECLINED
Push In
to Lock.
Engage into
Seatbelt
buckle
Far seatbelt slot.
11