Table of Contents
Advertisement
Electrical Safety and Installation
Requirements for AT-3714F
STANDARDS : This product meets the following standards.
Manufacturers Name:
Manufacturers Address:
Manufacturers Telephone:
Declares that the product:
Model Number:
Complies with FCC Part 15B, Class B Limits:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device must not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment, generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with instructions, may cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encourage to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes and modifications not expressly approved by the manufacturer or registrant of this equipment can void
your authority to operate this equipment under Federal Communications Commission rules.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du
Canada.
RFI Emission
Immunity
IMPORTANT : This equipment must be operated in accordance with safety precautions. To see any safety warnings in this guide in
multiple languages, refer to Appendix A, Translated Safety Information, at the page number indicated by the
WICHTIG : Für den Betrieb dieses Gerätes ist die Einhaltung von Sicherheitsvorkehrungen erforderlich. Wenn Sie
eine der Sicherheitswarnungen dieser Anleitung in mehrsprachiger Übersetzung lesen möchten, finden Sie diese in
Anhang A, "Übersetzte Sicherheitsinformationen", unter der Seitennummer, auf die mit dem Symbol
wird. (German)
VIGTIGT : Dette udstyr skal bruges i overensstemmelse med sikkerhedsadvarslerne. Sikkerhedsadvarslerne i denne
flersprogede håndbog kan findes i tillæg A oversatte sikkerhedsinformationer på det sidenummer, der er angivet ved
-symbolet. (Danish)
BELANGRIJK : Dit apparaat moet in overeenstemming met de veiligheidsvoorschriften worden gebruikt. Om
veiligheidswaarschuwingen in deze handleiding in meerdere talen te zien, refereren aan Aanhangsel A, Vertaalde
veiligheidsinformatie, op de door het
IMPORTANT : Cet équipement doit être utilisé conformément aux instructions de sécurité. Pour consulter les
avertissements en diverses langues dans ce guide, reportez-vous à l'annexe A, « Traductions des informations de
sécurité », qui figure à la page signalée par l'icône
Declaration Of Conformity
Allied Teleysn International, Corp.
950 Kifer Road
Sunnyvale, CA 94086 USA
408-730-0950
Fiber Ethernet Switch
AT-3714F
Canadian Department of Communications
EN55022 Class B
EN50082-1
symbool aangegeven pagina. (Dutch)
. (French)
icon.
verwiesen
v
Advertisement
Table of Contents
